myke
Member
Registered: 7th Feb 01
Location: High Wycombe, Buckinghamshire
User status: Offline
|
c20xe into corsa gsi,
just trying to hook up all the coolant hoses, but not entirely sure what i'm doing.
i have the twin entry expansion tank.
got the rad sorted no probs, and i know the tank outlet goes to the elbow in the hard pipe, but not sure about everything else.
need two for inlet to tank,
one to go into the n/s end of the head,
i have a hose from round the back of the head that at the moment goes down toward the o/s wheelarch,
and nothing to the matrix pipes yet.
any help much appreciated. 
|
Greasemonkey
Member
Registered: 17th Apr 02
Location: Drives a Tractor
User status: Offline
|
one of the pipes from the header tank usually goes to the throttle body ???
|
myke
Member
Registered: 7th Feb 01
Location: High Wycombe, Buckinghamshire
User status: Offline
|
there's 2 in the c16 throttle body.
one going to the tank, and one T-ing into the hose from back of inlet into matrix
|
myke
Member
Registered: 7th Feb 01
Location: High Wycombe, Buckinghamshire
User status: Offline
|
but there's no connections that i can see in the 2ltr throttle body
|
Greasemonkey
Member
Registered: 17th Apr 02
Location: Drives a Tractor
User status: Offline
|
oh i get ya maybe if there is no connection it needs plumbing back into the system, carnt see it though because ya have to change to the GSI tank with 2 hoses in the top when doing conversion cos they gotta go some where, sorry i carnt help dude
|
myke
Member
Registered: 7th Feb 01
Location: High Wycombe, Buckinghamshire
User status: Offline
|
cheers mate.
i've now got one of the inlets to tank (small hose, top of rad), but am missing the second.
also short of feed and return from heater matrix,
and something that goes to the end of the cylinder head.
|
Greasemonkey
Member
Registered: 17th Apr 02
Location: Drives a Tractor
User status: Offline
|
cylinder head??? the thermostate one??
Carnt ya use the corsa GSI hose for this
|
myke
Member
Registered: 7th Feb 01
Location: High Wycombe, Buckinghamshire
User status: Offline
|
no, got a stat to rad top hose from a 12v corsa.
there's an inlet/outlet connection on the end of the head at the other side.
at the bottom here.
|
Greasemonkey
Member
Registered: 17th Apr 02
Location: Drives a Tractor
User status: Offline
|
oooo ya fooker, ya sure ya not got the pipes mixed up some where, i would have tried to stick the header tank bottom hose on that baby, only one thing for it ask on MIGWEB lol
|
Adam_B
Member
Registered: 13th Dec 00
Location: Lancashire
User status: Offline
|
quote:
Originally posted by myke
no, got a stat to rad top hose from a 12v corsa.
there's an inlet/outlet connection on the end of the head at the other side.
at the bottom here.
goes into the bulkhead i think. saying i think as i dont have a cylinder head at the moment 
|
myke
Member
Registered: 7th Feb 01
Location: High Wycombe, Buckinghamshire
User status: Offline
|
great, so that's for heater matrix.
|
Adam_B
Member
Registered: 13th Dec 00
Location: Lancashire
User status: Offline
|
if you need any help give us a shout mate as mines all in bits at the moment. 
|
myke
Member
Registered: 7th Feb 01
Location: High Wycombe, Buckinghamshire
User status: Offline
|
nice one, cheers mate.
may drop you a line tomorrow.
|
and-m
Member
Registered: 5th May 02
Location: Liverpool. Drives. Skud vRS.
User status: Offline
|
yes thats for the matrix
|
