Andy4k
Member
Registered: 30th Jun 04
Location: Stockton-on-Tees
User status: Offline
|
hello i have a corsa 1.6 gsi with manzel manifold and shit loads other engine mods and a was driving it today when the in car heater started cutting out then died then radiator fan died and batt seemed deadish any1 have any idea's?
Thanks Andy,
|
Andy4k
Member
Registered: 30th Jun 04
Location: Stockton-on-Tees
User status: Offline
|
???
|
VegasPhil
Premium Member
Registered: 16th Jan 05
Location: Fareham, Hants Drives: Octavia VRS
User status: Offline
|
Does it turn over?
Corsa 2.0 16v Vegas - Sold
|
Andy4k
Member
Registered: 30th Jun 04
Location: Stockton-on-Tees
User status: Offline
|
no had to be pushed
|
Andy4k
Member
Registered: 30th Jun 04
Location: Stockton-on-Tees
User status: Offline
|
???
|
Col004
Member
Registered: 25th Jun 03
User status: Offline
|
when you fitted the mantzel, there is an earth lead which used to go on the old inlet and is now re-possitioned to the head were the throttal body used to be, if its any were eles that is not effective enough, with the cold weather if this earth lead gets any moisture on it, it cuts the car out as its the main earth for the coil pack.
hope this helps mate
|
Andy4k
Member
Registered: 30th Jun 04
Location: Stockton-on-Tees
User status: Offline
|
is they any other possibilites i could check at the same time?
|
Col004
Member
Registered: 25th Jun 03
User status: Offline
|
not that i can think of mate, the above what i said is what happened to me when i had my 1600 before i put the LET in 
[Edited on 17-11-2005 by Col004]
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
dead altinator?
|
Andy4k
Member
Registered: 30th Jun 04
Location: Stockton-on-Tees
User status: Offline
|
col and did yours start up alright and drive but ya heaters in ya car didn't blow and ya fan on the radiator wouldn't work so if ya drive it, it will over heat because no fan?
|
Col004
Member
Registered: 25th Jun 03
User status: Offline
|
never had them probs mate, that earth is just the engine side of the loom. as for your problem with the rad and heater blowers....they both work from the same relay and they are sittuated behind the glove box so maybe that is sticking. or like muppetsport said could be a dead altinator if the engine is conk'd as well
|
Andy4k
Member
Registered: 30th Jun 04
Location: Stockton-on-Tees
User status: Offline
|
found out what the problem was it was the egnition module the second round relay thing behind the egnition
|