Butler
Member
Registered: 2nd Jun 05
Location: London
User status: Offline
|
As Jamesvalver did. Im going to spray inside the rear of my car. Just wondering what line people spray up to as it cant be easy to blend, and what stages are involved. Theres a bit of rust on my shell. What should I use to sand it down, and what primer and how many coats should I use?
|
broster
Premium Member
Registered: 6th Dec 02
Location: Drives: E39
User status: Offline
|
i painted mine the following way:
rubbed it with some scotch brite
washed it down with white spirits
primed it with metal primer
paintedit with satin black paint from halfords.
|
loo_goblin
Member
Registered: 14th Jul 04
Location: Horsham, West Sussex
User status: Offline
|
use 2k etch primer
|
M16KE B
Member
Registered: 24th Feb 04
Location: Stirling
User status: Offline
|
did this on my nova, im eventually going to spray the whole floor anyway so as far as taking it to a line i cant help you there, just find a nice straight edge to stop against.
Sand down, pretty well, especially rusty bits, primer - i used a zinc coated grey primer - but about 3 coats on and sanded in between. then a few coats of your colour, sand with wet n dry if you want to be super smooth, then laquer if you wish! her presto!
|
loo_goblin
Member
Registered: 14th Jul 04
Location: Horsham, West Sussex
User status: Offline
|
if you not going down to bare metal dont use etch primer
|
Butler
Member
Registered: 2nd Jun 05
Location: London
User status: Offline
|
Nah it wont be going bare, im going to spray up to the front under th seats which will be out of view, dont want to go as high as windows though so dont really know where to stop lol. What do people use to mask everything off?
|