johnscorsaXE
Member
Registered: 14th Sep 04
Location: Walsall
User status: Offline
|
i need to know what colour wire does what on the gsi dials.
cable driven, and 16 wires
info will be mucho apreciated
|
johnscorsaXE
Member
Registered: 14th Sep 04
Location: Walsall
User status: Offline
|
anyome??
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
its all in the haynes manual. it has a detailed wiring diagram and description of each wire. if theres anything in paticular you need help with with wire colour let me know. If I can find my haynes manual ill try and scan it .
|
johnscorsaXE
Member
Registered: 14th Sep 04
Location: Walsall
User status: Offline
|
cheers dave. basically i need to know what each wire is for on the back of the dials. it should be a 16pin plug.
cable driven clocks
|
johnscorsaXE
Member
Registered: 14th Sep 04
Location: Walsall
User status: Offline
|
anyone got the haynes manual they could scan for me please?
|
johnscorsaXE
Member
Registered: 14th Sep 04
Location: Walsall
User status: Offline
|
dave..pm was sent mate. u get it?
|
johnscorsaXE
Member
Registered: 14th Sep 04
Location: Walsall
User status: Offline
|
anyone?
|
gee2er
Member
Registered: 7th Aug 06
Location: Birmingham
User status: Offline
|
hi my clocks was a straight swop all i had to do was add 1 wire to get the rev counter to work everything else worked
|
Ben ev
Member
Registered: 23rd Oct 05
Location: kingslynn / torquay
User status: Offline
|
gee2er what pin location is the rev counter pulse wire?
|
johnscorsaXE
Member
Registered: 14th Sep 04
Location: Walsall
User status: Offline
|
rev is pin9
in between a brown, and a brown/blue wire
|
gee2er
Member
Registered: 7th Aug 06
Location: Birmingham
User status: Offline
|
yes its pin9 i choped the plug out the car in the scrappy i got my clocks from, come home removed pin9 from the choped plug added it to my plug then exstended the wire down to the big block connector infrount of the ecu and connected it to the green wire and it worked fine and still is
|