City
Member
Registered: 30th Dec 03
Location: Wakefield Drives: Red GSi
User status: Offline
|
car L reg corsa GSi
ok i have all the parts
i started on the passenger side (does that matter??)
it has 16 pins on passenger side in the loom?
firstly stripped door down
fitted electric mirror
then i swopped over the looms - pluged everything in speakers, mirror, switch motor, central locking
only thing that works is CL and speakers (had them in first place)
checked fuses all fine??
how come there no power?
[Edited on 21-11-2006 by City]
|
flash22
Member
Registered: 13th Sep 05
User status: Offline
|
from what i can remember you need the driver loom/swiches in place so that the passenger side works
plug the drivers door loom in with the switches pluged in (dont really need the drivers motor to see if it works)
There are 2 fuses for the electric windows F17 10 amp and F28 30 amp
|
City
Member
Registered: 30th Dec 03
Location: Wakefield Drives: Red GSi
User status: Offline
|
quote:
Originally posted by flash22
from what i can remember you need the driver loom/swiches in place so that the passenger side works
plug the drivers door loom in with the switches pluged in (dont really need the drivers motor to see if it works)
There are 2 fuses for the electric windows F17 10 amp and F28 30 amp
so i dont need to strip drivers door down just plug the new loom in??
and make sure switches are in?
how will i know if they have power, by switches lighing up?
|
flash22
Member
Registered: 13th Sep 05
User status: Offline
|
open the door unplug the multiplug plug and plug the loom in to test it. The window switches should light up when the side lights are on your also need the ignition is on (lights on dash)
yes just make sure the switches are pluged into the loom
|
City
Member
Registered: 30th Dec 03
Location: Wakefield Drives: Red GSi
User status: Offline
|
any thing else to try if this doesnt work?
|
Reaper
Member
Registered: 24th Jul 06
Location: Launceston, Cornwall
User status: Offline
|
I dont think that the loom inside the car itself has all the cables, when i put CL in my car all i had was the speaker cables going through the plug and on the otherside the only cables pluged in to the cars loom was the speakers.
So you might want to check the car loom is all there. Just a thought.
|
flash22
Member
Registered: 13th Sep 05
User status: Offline
|
Good point its hit and miss if the car loom is there on there earlier cars
City. You did check the the multi plug coming FROM the car and counted the pins\sockets and not just the door loom ????
|
City
Member
Registered: 30th Dec 03
Location: Wakefield Drives: Red GSi
User status: Offline
|
yes 17
|
City
Member
Registered: 30th Dec 03
Location: Wakefield Drives: Red GSi
User status: Offline
|
its a GSi it should have the wiring shouldnt it?
|
flash22
Member
Registered: 13th Sep 05
User status: Offline
|
As i said its very it hit and miss on the early ones 16/17 sounds about right on the car harness/loom
time to get the multimeter out me thinks if it dont work
oh. the mirrors are on f17 10 amp too
|
City
Member
Registered: 30th Dec 03
Location: Wakefield Drives: Red GSi
User status: Offline
|
quote:
Originally posted by flash22
As i said its very it hit and miss on the early ones 16/17 sounds about right on the car harness/loom
time to get the multimeter out me thinks if it dont work
oh. the mirrors are on f17 10 amp too
not tried it yet with all switches plugged in- just seems strange as there is 16 or 17 pins in the car and the fuse box had a gap were the fuse should be. as gsi's had op extras of electric windows and mirrors I thort the loom would be there??
has anyone done this on a a 1994 L reg GSi?
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
as said, would seem to be a missing relay/fuse tbh.
|
City
Member
Registered: 30th Dec 03
Location: Wakefield Drives: Red GSi
User status: Offline
|
quote:
Originally posted by Robin
as said, would seem to be a missing relay/fuse tbh.
i put a 30 amp fuse in for the windows
|
