Daimo B
Member
Registered: 20th Mar 00
User status: Offline
|
Here's whats left. Starting a new post with new prices as i've got all the parts now and some arn't as prestine as they were when I was looking after the car properly
I can send higher res images if need be.
C20XE/20XE/C20LET chrome cam cover. Slight blemishes in the chrome, but not too bad. Might be able to be polished out?
£80 inc delivery.
C20XE/20XE/C20LET Chrome pulley cover. Again, chromes not in great condition, could do with a clean, and the chromes come off down by the pulley area, but its hard to see when its on the car, the main see-able area isn't too bad.
£45 inc delivery.
Pulley area.
Aurora Purple corsa B rear lights. Colour matched to car, originally clear rear lights, but sprayed. Comes with all the bulbs from the car too.
£30
Custom Corsa B exhaust system. Comes in 2 parts. Its a 2" straight through system. It will require the corsa B spare wheel well to be cut away. There are a few hangers, but mine bolted through the floor, you way want to weld some more hangers and make another support system. Could possibly fit another car? Its two ORIGINAL Magnex 6x4's (one being the first corsa one ever ), mated to a twin 44mm pipes, into the 2" bore. I am willing to split, but please note it was a completly custom system!!!!
OFFERS on this. COLLECTION only though. Im near South East london (Bluewater shopping park).
Universal Twin pod A piller pod holder. Only needs a slight trim to fit any car. Brand new.
£15 inc delivery.
Corsa B locking wheel bolt set. = SOLD
V6 288mm front brakes to fit Corsa/Nova. Original 4 stud plain discs, NOT re-drilled items. Comes with greenstuff pads fitted. Painted black. Does NOT come with braided lines as shown in pic.
£100
Collection only, or a fair bit P+P due to weight.
Cobra LeMans front seats. Fits directly onto original Corsa B subframes (maybe Nova?). 30 min job to fit. Very big comfy armchairs. No rips or burns.
BARGIN at £230 the pair. Collection Only!!!
Irmscher rear bumper. The original reg light hole needs re-smoothing, and u'll either need to sort some lights out for the rear reg, or find a TVR reg plate somewhere and wire it up like I had it done.
£SOLD
Also, I have a bag load of ICE cabling, power, speaker wire. I can take a picture, but theres enough to cable up a 145db, twin sub, x4 component speakers audio system. PLease U2U me if your interested.
ALSO, I still have my 16" dished alloys. 1 is kerbed a little, but all 4 need a damn good polish up, and they will be spotless. Its jsut where they have been left unpolished for 2+ years so have got a little tatty. Someone needs to get a polishing tool on them and make them spotless again. They are League 041 alloys, and im pretty much certain no-one will have them on a corsa, and very few probably left on the road. None i've seen had a polished lip. 4 tyres with laods of tred. Can provide an image for serious buyers.
Collection only
£275
[Edited on 10-08-2008 by VXR]
[Edited on 10-08-2008 by VXR]
[Edited on 16-08-2008 by VXR]
|
Daimo B
Member
Registered: 20th Mar 00
User status: Offline
|
Bumper added.
|
Daimo B
Member
Registered: 20th Mar 00
User status: Offline
|
Locking wheelnuts sold
|
Daimo B
Member
Registered: 20th Mar 00
User status: Offline
|
Bump as I want rid
|
Daimo B
Member
Registered: 20th Mar 00
User status: Offline
|
Rear bumper provisionally sold!!
|
Tom G
Member
Registered: 4th Aug 08
Location: Cheshire
User status: Offline
|
Any Neogation on the price of the alloys??
|
Daimo B
Member
Registered: 20th Mar 00
User status: Offline
|
Possibly, but im not going much lower. They need a polish, but they have 4 good tyres, easily sorted, and very rare.
|
Daimo B
Member
Registered: 20th Mar 00
User status: Offline
|
Rumpetty bumpetty
|
Daimo B
Member
Registered: 20th Mar 00
User status: Offline
|
Rear bumper SOLD
|
Daimo B
Member
Registered: 20th Mar 00
User status: Offline
|
Bump again.
|
Gareth F
Member
Registered: 16th Jan 08
Location: Location Location
User status: Offline
|
Where abouts are you?
G
|
Daimo B
Member
Registered: 20th Mar 00
User status: Offline
|
quote: Originally posted by VXR
Im near South East london (Bluewater shopping park).
|
Gareth F
Member
Registered: 16th Jan 08
Location: Location Location
User status: Offline
|
Ah finally someone not from yorkshire selling stuff lol. See so much stuff i want but can never get there.
What color are the seats, Grey or black? Also weird question but whats the width of the back rest on the seat? Sat in a few mates cars with bucket seats but due to being fairly well built (not fat!) i found them uncompfy as they dug in my sides
Cheers
G
|
ProjectNCK
Member
Registered: 22nd Oct 07
Location: Burnley, Lancashire
User status: Offline
|
should the twin bore be fitted without altering the car ? And fit any system ? or require aftermarket ?
Id love to fit that to mine , but its 1.0l nd all standard and dont really know alot about systems etc.. .
[Edited on 20-08-2008 by ProjectNCK]
|
Daimo B
Member
Registered: 20th Mar 00
User status: Offline
|
Munky - Seats are black material. I even bought the same material from Cobra and re-trimmed my interior to match it (pics on my site under My Cars, D, link is <---- )
Project - Exhaust is a 2" bore, same as a standard 2.0, slightly larger than a standard Corsa bore. You can fit it on with no ill effects to your engine. As said, it'll need the spare wheel well being cut away.
|
Daimo B
Member
Registered: 20th Mar 00
User status: Offline
|
bump
|
Daimo B
Member
Registered: 20th Mar 00
User status: Offline
|
BUMP.
No offers on the exhaust at all.
WELL suprised the seats haven't sold yet.......
|