mattcape
Member
Registered: 4th Aug 05
Location: Kings Langley Drives: Astra H
User status: Offline
|
I have just fitted a c20xe into my corsa and cant seem to get reverse gear.. its as if i cant push the gearstick over far enough to engage reverse.! anyone had this problem or no's what the problem is?
Cheers..
Mattcape.
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
is it catching on the steering rack as the linkage is trying to pull backwards?
|
sumner2k3
Member
Registered: 12th Jan 06
Location: South Wales Drives: Clio 172
User status: Offline
|
had this problem with one of my odl xe's.. the pin the goes through the linkage and the bit that on the selector on the box had slightly came out.. just wiggle it about and push it back in and then its fine.. thats if that is the problem obviously
|
mattcape
Member
Registered: 4th Aug 05
Location: Kings Langley Drives: Astra H
User status: Offline
|
hmmmm i will go have a look now cheers
|
Root
Member
Registered: 28th Dec 08
User status: Offline
|
have the same problem sometimes but not all time. I just either put it in 1st then 2nd then reverse (and it works), or pump the clutch in neutral a few times then select reverse (also works)
|
XozziDK
Member
Registered: 2nd Sep 09
Location: Denmark
User status: Offline
|
You'll need to adjust the connection between the gear arms underneath the car. Just put the gear in neutral, loosen the bolt, have a buddy to hold the gearstick inside the car as it would be placed when its in neutral, and then tighten the bolt again
Should do the job. If it doesn't work, try again in another position with the gearstick (probably more to the right as its the reverse gear thats not working, and you need more space to the left to reach reversegear)
And it's possible you get it adjustet too much, so that you cant go in 5th or another random gear, you'll have to find the magic spot where all gears work :b
[Edited on 05-11-2009 by XozziDK]
|