moddedcorsa
Member
Registered: 15th Aug 02
Location: Argyll, West scotland
User status: Offline
|
In the process of fitting a x16xe into a corsa b sxi. Im using the original sxi loom, ive traced all the ecu feeds and pulled them inside the car. The x16xe loom has all the required feeds connected on the 9pin plug. (and sxi fuel pump relay in the glove box linked out, so only the 16xe one is doing the work)
Ive fitted the x16xe transponder pickup ring on the barrel, and the chip into the key, and pluged it into the old transponders plug.
When turning the ignition on the engine management light flashes? Is there anything else i need to connect (the x16 loom has a square plug with 3 wires on it which isnt connected to anything at the mo)
Havent had much dealings with these engines for a few years, so wondering if anybody has come up with a way of by-passing the imobiliser?
|
1999corsa b
Member
Registered: 22nd Feb 09
Location: Sheffield
User status: Offline
|
It will be the immobiliser thats doing it, my jeep does it when it imobilses its self. Does it turn over? They usually turn over but no fuel cause it imobilises the fuel, if ur stuck i have some 1.6 wiring diagrams for there engine managment system
Ash
|
fazza
Member
Registered: 7th Feb 08
Location: Plymouth
User status: Offline
|
had similar problem on my old sport, someone had taped a chip to the barrel 
if that doesnt work then try another ecu/tansponder/chip as it doesnt sound like there matched
|
moddedcorsa
Member
Registered: 15th Aug 02
Location: Argyll, West scotland
User status: Offline
|
Helpfull as ever guys, but thankfully it was a simple fix. I hadnt connected one of the transponder ring - ecu feeds  So its now running (all be it very noisy with just a downpipe fitted lol)
|
