Wolf In Welsh Clothing
Member
Registered: 31st Mar 03
Location: North Wales...... Cooper S on order
User status: Offline
|
My corsa kept on cutting ou with me unichip rev limit module!
What chips are people running and what rev limits are they?
Mines a 98 corsa sport so needs re-programming, is it possible to raise rev limit by other means than the unichip bit or going for a full on race ECU?
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
reset the ecu see if that helps, im sure u know how to do that.
if it keeps cutting out while you are going at high speed, you need it reprogrammed, at idling check ur idle valve ect
|
mattyboy199
Member
Registered: 5th Feb 03
User status: Offline
|
get your immobliser checked thats what made mine cut out.
|
Wolf In Welsh Clothing
Member
Registered: 31st Mar 03
Location: North Wales...... Cooper S on order
User status: Offline
|
Immobiliser is controlled by the crystal.
Everything is ok when the crystal is on the board where it should be but plays up when in the rev limit raiser!!!!!!
Vauxhall are gonna try and re-program me ECU for me tomorrow to raise the rev limit!!!!!!
For a lot cheaper than what superchips charge!!!!!!
Hope they can change it!!!!! 
[Edited on 06-05-2003 by Wolf In Welsh Clothing]
|
stuyw
Member
Registered: 15th May 02
Location: North West Drives: Rev3 MR2 Turbo
User status: Offline
|
ive got a BBR chip in mine and it revs to 7300 n had no problems yet
<touches wood>
|
Wolf In Welsh Clothing
Member
Registered: 31st Mar 03
Location: North Wales...... Cooper S on order
User status: Offline
|
BBR want at least £150 though!
Cheaper than superchip but already got £400 of unichip, map aint got any flat spots so dont really wanna change anything but the rev limit.
Cheers for posting the rev limit though!
Hav heard that superchips is 7200rpm or 7500RPM (think its 7500)
Vauxhall said they will only want half an hours labour!!!!!!!!!!
Just hope they can re-progam mine!!!!!!!!
[Edited on 06-05-2003 by Wolf In Welsh Clothing]
|
mattyboy199
Member
Registered: 5th Feb 03
User status: Offline
|
Well the imobiliser made mine cut out so there !
|
Wolf In Welsh Clothing
Member
Registered: 31st Mar 03
Location: North Wales...... Cooper S on order
User status: Offline
|
quote:
Originally posted by mattyboy199
Well the imobiliser made mine cut out so there !
Soz, but I knew me immobiliser was workin as i had 2 re-activate me cat2 every 20 secs to bump start it the other day!
Has been an absolute git!!!!!!!!!!!!!!!!!!!
I wish it had been an immobilser.
By the way, did you have your immobiliser fixed or disconnected?
Might have to try disconnecting mine to get the raised rev limit back.
Cheers.
|
mattyboy199
Member
Registered: 5th Feb 03
User status: Offline
|
well the circuit board connections were coroaded so they re soldered them & now its fine.
|
