beany113
Member
Registered: 19th Jul 11
Location: Sittingbourne, Kent
User status: Offline
|
hi guys, im turbo'ing my gsi and i have most of the parts here,
turbo - corsa sri from the new corsa D
intercooler with all pipework
oil cooler
relocated oil filter
turbo manifold
oil feed and return
down pipe
tapped sump
the things i need to get are decomp plate, and ecu.
just wondering if i need 2 head gaskets 1 either side of the decompression plate??
and also do i need a programable ecu? or would it be possible to get it live mapped with the standard ecu?? 
if there is anything else that people would like to add in then PLEASE do!! i have never worked with a turbo before so please bare with me im trying to research as much as i can 
thanks lads! 
|
beany113
Member
Registered: 19th Jul 11
Location: Sittingbourne, Kent
User status: Offline
|
anyone able put in any advice or any sort of knowledge??
|
Eck
Premium Member
Registered: 17th Apr 06
Location: Lundin Links, Fife
User status: Offline
|
You won't be able to get the standard ecu to work with it. Stand alone like Omex, Emerald etc are the way to go.
|
beany113
Member
Registered: 19th Jul 11
Location: Sittingbourne, Kent
User status: Offline
|
Okay eck! Thankyou  just wanted to clarify a few things, if anyone else I amble to help out with anymore info that I might need it'd be great! Thanks!
|
corsa-torque
Member
Registered: 15th Mar 11
User status: Offline
|
Using a de-comp plate you will need to use 2 gaskets.
A more reliable way, would to use low comp pistons if they make them.
As for the ecu, you will need aftermarket management.
Might also need larger injectors
|
beany113
Member
Registered: 19th Jul 11
Location: Sittingbourne, Kent
User status: Offline
|
Hi thanks for that corsa-torque! I have read up and I will be ble to ise standard injectors as ill only be running around 5-6psi as it will be standard internals until I can afford low comp roads and pistons thanks for your comment!
|
IvIarkgraham
Premium Member
Registered: 27th Mar 04
Location: Ellesmere Port, Cheshire
User status: Offline
|
corsa vxr pistons fit dont they?
|
IvIarkgraham
Premium Member
Registered: 27th Mar 04
Location: Ellesmere Port, Cheshire
User status: Offline
|
also have you got a new inlet for it?
|
beany113
Member
Registered: 19th Jul 11
Location: Sittingbourne, Kent
User status: Offline
|
What do you mean mark? I have a power box currently fitted, what sort of inlet we on about? Thanks
[Edited on 28-03-2013 by beany113]
|
IvIarkgraham
Premium Member
Registered: 27th Mar 04
Location: Ellesmere Port, Cheshire
User status: Offline
|
a powerbox was what i meant
|
beany113
Member
Registered: 19th Jul 11
Location: Sittingbourne, Kent
User status: Offline
|
Ah okay buddy, yeah i have a vx power inlet box
|
Daimo B
Member
Registered: 20th Mar 00
User status: Offline
|
I thought Luke ran standard ECU? Pretty sure he didn't have a standalone? But can't be sure, it was a loooong time ago.
From memory, most "tuner"s used a 5th injector and 3 head gaskets for the compression. He also ran a Mantzel box and it was around 180bhp with about 6-7psi.
Video, about 4min 30. Ran a 1.4 16v (f13) gearbox and it pulled to the limiter (6600rpm, 117mph) pretty quickly.
http://www.youtube.com/watch?v=Qd8DYFyvu5o
Different car, same setup.
[Edited on 28-03-2013 by Daimo B]
|
Pridzz
Member
Registered: 18th Nov 08
Location: Exmouth - Devon
User status: Offline
|
Obviously you'll more then likely need a different exhaust from Standard if you already havnt got one
|
beany113
Member
Registered: 19th Jul 11
Location: Sittingbourne, Kent
User status: Offline
|
Thanks daimo!! I've asked a few people and been told the 5th injector isn't required so still a little confused! Ill be running a decompression plate with a head gasket either side to lower the competition ratio, and yes pridzz ill need to get a turbo back exhaust system! thanks lads, anymore help clearing up this 5th injector would be great!!
|
monkeytwizzel
Member
Registered: 10th Aug 11
Location: Chard, Somerset
User status: Offline
|
A 5th injector would be used to help with extra fueling at high rpm as i can`t see it required for start up as the ecu can be programed do deal with that.
|
beany113
Member
Registered: 19th Jul 11
Location: Sittingbourne, Kent
User status: Offline
|
Ah okay matey, maybe I'm going to have to look into this then :/ how would you go about adding an extra injector?
|
jay.jay
Member
Registered: 28th Dec 10
Location: Gloucestershire
User status: Offline
|
Is there a project thread for that Red one? It's the same setup I'm aiming for with the dbilas throttle bodies
|
gazza808
Member
Registered: 30th Jun 08
Location: Peterborough
User status: Offline
|
Fit megasquirt it's way easy and cheap, then you can use bigger injectors.
5th/6th injectors are shit.
Won't need to touch the comp ratio and easily run 10/12psi with some decent mapping.
|
beany113
Member
Registered: 19th Jul 11
Location: Sittingbourne, Kent
User status: Offline
|
I've had a good read and I've just found something on PnG, people are saying if you use a stand alone management then a 5th injector isn't needed? Also your able to use the c20xe cream injectors to get abit more fuel. I don't know a lot about turbo's or the turbo conversions but this seems abit more plausible and with like DTA management I should be able to run on 4 injectors??
|
beany113
Member
Registered: 19th Jul 11
Location: Sittingbourne, Kent
User status: Offline
|
Thanks gazza, Im defiantly getting eithe DTA or mega squirt and then it will be just a case of letting a decent mapper work his magic?? Really appreciate people helping me out!!
|
Eck
Premium Member
Registered: 17th Apr 06
Location: Lundin Links, Fife
User status: Offline
|
As said, just get bigger injectors and have a good mapper set it up. Then you won't need a 5th injector. The best thing you can do is establish who will be mapping it, and having a chat with them. They'll be able to give some advice and you can find out what management they prefer working with.
[Edited on 28-03-2013 by Eck]
|
beany113
Member
Registered: 19th Jul 11
Location: Sittingbourne, Kent
User status: Offline
|
Thanks eck! Looks like I'm On the hunt for some cream injectors  thanks for the help guys!!
|
gazza808
Member
Registered: 30th Jun 08
Location: Peterborough
User status: Offline
|
I have some blues, which are practically the same, some say a better spray pattern,
U2u me an offer.
|
Daimo B
Member
Registered: 20th Mar 00
User status: Offline
|
quote:
Originally posted by jay.jay
Is there a project thread for that Red one? It's the same setup I'm aiming for with the dbilas throttle bodies
Nope, was a chap in his 50's who lived on the Isle of Wight, work was done by cough cough Regal...
Used a T25 turbo, 75 shot of Nitrous, and a claimed 225bhp without the Nitrous.
Found a pic of Lukes in the vid I posted also.
Oh, someone said about cream injectors, that also rings a bell in the conversion too.
May be worth giving Courtney a call (if they are still running?) so see if they can offer any advice.
|
beany113
Member
Registered: 19th Jul 11
Location: Sittingbourne, Kent
User status: Offline
|
Appreciate that diamo!! You guys hae seriously helped me out!
|
