Aidan-Fleming
Member
Registered: 17th May 08
Location: Westhill, Aberdeenshire
User status: Offline
|
Managed to sort out most of my loom but still have a couple issues.
One being this plug is left over and don't know what connects into it?
This was plugged into my loom and there's only two wires coming from it, a red and a black.
Do these connect to the alternator and starter or do they go to battery?
Another being I found this plug plugged into somthing on the underside of my inlet. The other end was still plugged into my loom so I know where I need to join the wires.
But there's 7 wires coming from the loom and only 5 on the plug so what do I do with the other two?
Was plugged into this
This is the plug on loom
And this is the plug that's into the underside of inlet
That plug above needs joined wire to wire with the bit on loom. But there's these two wires left over
I have this bit of loom.
I know the blue and white wire goes to alternator
But where does the black and red go?
There's also a thin green/blue with a 1 pin plug which plugs into bottom of block for oil presure.
But I haven't got a plug on my loom for it, so don't know if it actually plugs into XE loom or corsa loom.
The plug
I can see the bit still on alternator and the one pin plug plugged in.
So where does the black/red go?
On the back of my starter I have a red and black which I prosume go to battery?
Also it looks like somthing else goes to the left of it?
I have a black wire coming out of here. Now I have a loom that's connected into the knock sensor and also into ICV. But there's not a plug on my loom anywhere that fits. :/
This is the thin black wire
On my mates loom he has a plug where his ICV and knock loom connect to.
But he has about 5 wires coming out and I only have one black
Any help guys will be muh appreciated! Thanks alot!
|
Aidan-Fleming
Member
Registered: 17th May 08
Location: Westhill, Aberdeenshire
User status: Offline
|
someone must knoW!
|
monkeytwizzel
Member
Registered: 10th Aug 11
Location: Chard, Somerset
User status: Offline
|
the red on the starter is the same red wire that is on the altenater and the black goes to the battery,for the green/blue oil pressure use the one on the car loom.
|
Aidan-Fleming
Member
Registered: 17th May 08
Location: Westhill, Aberdeenshire
User status: Offline
|
Okay so the red wire on starter and red on alternator is linked? Then the black on starter goes to battery? + or -?
What goes on the other bit of starter?
The thin blue/white on alternator, where does that connect to as I haven't got a plug on my Xe loom to suit
|
monkeytwizzel
Member
Registered: 10th Aug 11
Location: Chard, Somerset
User status: Offline
|
There not on the the xe loom,for starter/charging circuit and oil pressure use the car loom.
16v shell 1.0 or 1.2? if so read up well as they are bastards for a first attempt.
battery on gm black+ brown-.
|
