ed
Member
Registered: 10th Sep 03
User status: Offline
|
He didn't know what kind of Porsche he bought though.
|
Gareth F
Member
Registered: 16th Jan 08
Location: Location Location
User status: Offline
|
In the pics is doesnt look like the primer has taken to the plastic properly so dave might be right but there are ways to say it.
Very good points above on how to get rid of the scratches. A good paint job all depends on how good the prep work is, take your time and it will pay off.
|
SteveO _1.6
Member
Registered: 30th Oct 09
User status: Offline
|
if you jump from 80 to 350 you wont get the 80grit scratches out, you need to flat 80 with 180 and then to 320. then you can put loads of coats of high build on. i would suggest at least 4 or 5 coats.
then wet flat the primer with 800. shoul turn out like so ............
http://www.corsasport.co.uk/carimages/9027/Corsa_002.JPG
|
jon-valver
Member
Registered: 28th Mar 10
Location: West Yorkshire
User status: Offline
|
ok sound..... gonna do arches aswel wats best way to do these take them off car and sand them ect or leev them on car? and making tape
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
remove them.
|
jon-valver
Member
Registered: 28th Mar 10
Location: West Yorkshire
User status: Offline
|
ok will do.... gonna have to do rear bumper on car though as cba removing that.
|
B3KAN
Member
Registered: 15th Feb 07
Location: Inverness, Highland
User status: Offline
|
quote:
Originally posted by Joe
Dave likes to be a know it all patronising cunt.
|
markx14xe
Member
Registered: 5th Oct 08
Location: grimsby
User status: Offline
|
quote:
Originally posted by jon-valver
ok will do.... gonna have to do rear bumper on car though as cba removing that.
it aint hard jon tbh just the 2 arch bolts either side of the car
and few on the top maybe 2 under aswell or maybe the front cnt remember aint took mine off in ages
|
markx14xe
Member
Registered: 5th Oct 08
Location: grimsby
User status: Offline
|
is your plan to repaint and smooth the bumpers
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
quote:
Originally posted by Tom G
quote:
Originally posted by DaveyLC
Give up.. Its all going to fall out..
What a prick you really are.
Even if a professional body shop filled and smoothed an ABS bumper using the finest prep work and the best fillers it would eventually crack and fall out. Unless you plastic weld pieces in over the recess and use the most thin layer of filler it WILL fuck up.. And considering Jon doesnt even know how to opperate a piece of sand paper its an envitable failure (I can already see chunks of filler missing in those photos).
|
corsabsonny
Member
Registered: 5th Jan 10
Location: chatham, kent
User status: Offline
|
240, plastic prime, high build, 600, reprime, 1200, paint
|
jon-valver
Member
Registered: 28th Mar 10
Location: West Yorkshire
User status: Offline
|
well weel see what happens.
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
Wee shore weel!
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
if you dont remove bumper you will have to mask entire car up as over spray gets every where. Good on you for having a go. You only learn by completely fuckin something up.
|
Tom G
Member
Registered: 4th Aug 08
Location: Cheshire
User status: Offline
|
quote:
Originally posted by DaveyLC
quote:
Originally posted by Tom G
quote:
Originally posted by DaveyLC
Give up.. Its all going to fall out..
What a prick you really are.
Even if a professional body shop filled and smoothed an ABS bumper using the finest prep work and the best fillers it would eventually crack and fall out. Unless you plastic weld pieces in over the recess and use the most thin layer of filler it WILL fuck up.. And considering Jon doesnt even know how to opperate a piece of sand paper its an envitable failure (I can already see chunks of filler missing in those photos).
Was it that hard to give advice? Instead of typing " FAIL blah blah", you only know what to do because of either A) You done it and fucked it up before or B) Someone told you how to do it.
Why you can't pass you're knowledge on without being a total prick about it, i don't know?
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
Love you too! x x x x x
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
its all about the clear coat davey replica. Tell them about clear coat.
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
It sure is, it sureeeee is!
|
