BeArDy
Member
Registered: 7th Aug 00
Location: Manchester
User status: Offline
|
Cybermonkey24 - i have seen your post and i am going to look into this, have you any Info as getting a GM charger would be alot easyer, if i could get the Brakers aswell over your way.
yes the Omega was RWD but i will be keeping mine FWD for the reason i can not be arse cutting the inside/Bulk head i like the Inside of my car as it is. Theres a C20LET 4x4 BAT corsa being built already  Phs 3.5, locking prop etc etc
power of the engine, well the company who want to do the charger for it said they will easy get 300bhp out of the standard 3lt V6 block so with the extra bits inside and NOS who knows (if i go ahead with the charger the car will be on the dyno alot so will have print outs).
as for room for the Charger, yes there loads as it sits over the drivers chass leg where the filter normaly sits so fitting eather will not be a problem.
The F28 is not new its called alot of time cleaning it  the engine will look the same when finished, also thinking of cutting the full bulk head away in the bay as seen a Pic of the C20XE in a corsa last week on here and looks so tidy with out it on.
All in all its just another route not alot have people have done normal people throw money at LET's, the good thing about the V6 is even at 300bhp it will be reliablue as i have found most LETs at 300mark are not, maybe that cos people dont spend the money to make the LET reliablue they just want BHP numbers
|
gsi-gaz
Member
Registered: 23rd Mar 03
Location: st helens
User status: Offline
|
u r one mad man u r!
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
maybe acid bath the heads.. i seen someone do this on a LET engine on mig... looked brand new...
|
Macca_G
Member
Registered: 15th Jan 03
Location: Stockport, Manchester
User status: Offline
|
My mates just put 214BHP down on the rollers with his 2.5 Flywheel, cams, 4bar he was well chuffed with that the biggest acceleration difference though is definaltley the flywheel - get it done ASAP!
|
Tom
Member
Registered: 3rd Apr 02
Location: Wirral, Merseyside
User status: Offline
|
Slightly mad, especially if you s/c and nos etc will be pushing silly power for a fwd car never mind in a corsa
|
Pablo
Member
Registered: 3rd Feb 03
Location: Milton Keynes
User status: Offline
|
Nuta sweet mate !
|
BeArDy
Member
Registered: 7th Aug 00
Location: Manchester
User status: Offline
|
quote:
Originally posted by Macca_G
My mates just put 214BHP down on the rollers with his 2.5 Flywheel, cams, 4bar he was well chuffed with that the biggest acceleration difference though is definaltley the flywheel - get it done ASAP!
the 2.5 is still to heavy, i will be using the F20 flywheel which is alot lot lighter that the 2.5 one
|
3CorsaMeal
Member
Registered: 11th Apr 02
User status: Offline
|
i'm still gonna be the first in the UK maybe the world to have an ant farm in a corsa 
gotta stay ahead of the game
|
K2 GTi
Member
Registered: 21st Oct 04
User status: Offline
|
holy shit ur cars gonna be rapid!!
|
3CorsaMeal
Member
Registered: 11th Apr 02
User status: Offline
|
nah, ants don't produce any extra BHP, if anything the weight of the soil will slow me down
|
SteveW
Member
Registered: 15th Jul 02
Location: Up in the clouds
User status: Offline
|
Beardy my man, will this be anywhere near ready for Maxlive in July ??
total nut you dude... (by the way, this is cheating in our race, 3.0 turbo is not fair against a LET so i WIN )
|
BeArDy
Member
Registered: 7th Aug 00
Location: Manchester
User status: Offline
|
quote:
Originally posted by 3CorsaMeal
nah, ants don't produce any extra BHP, if anything the weight of the soil will slow me down
i dont know 3,000,000 brake ant power 
|
BeArDy
Member
Registered: 7th Aug 00
Location: Manchester
User status: Offline
|
quote:
Originally posted by SteveW
Beardy my man, will this be anywhere near ready for Maxlive in July ??
total nut you dude... (by the way, this is cheating in our race, 3.0 turbo is not fair against a LET so i WIN )
will be dude i hope, as i am looking for it to be done for PVS
|
SteveW
Member
Registered: 15th Jul 02
Location: Up in the clouds
User status: Offline
|
sweet... will you be running up the strip @ PVS ??
if so i "might" run against you (if the cars working ok by then)
would be good to see the ThunderCorsa go against the BATmobile
|
BeArDy
Member
Registered: 7th Aug 00
Location: Manchester
User status: Offline
|
quote:
Originally posted by SteveW
sweet... will you be running up the strip @ PVS ??
if so i "might" run against you (if the cars working ok by then)
would be good to see the ThunderCorsa go against the BATmobile
Depends how close i cut it for finishing
last year i was up till 6:30 am and been working all night to get her finished for PV and dident finish it
BUT if i can get it all done with a week or so to run her in and get all the problems sorted then ye will run her up the 1/4
be good to see a V6 Vs LET
Thundercats Vs BATMAN 
if we do i will get a 2 Big BATMAN logo's made for each side and put them on before the start
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
^ you will have to wear a batman outfit toooo!...
|
Martin
Member
Registered: 15th Mar 04
Location: Dumpstable Drives: Aztec Sxi
User status: Offline
|
any idea of Bhp?
[Edited on 17-01-2005 by Aztec_sxi]
|
SteveW
Member
Registered: 15th Jul 02
Location: Up in the clouds
User status: Offline
|
quote:
Originally posted by BeArDy
quote:
Originally posted by SteveW
sweet... will you be running up the strip @ PVS ??
if so i "might" run against you (if the cars working ok by then)
would be good to see the ThunderCorsa go against the BATmobile
Depends how close i cut it for finishing
last year i was up till 6:30 am and been working all night to get her finished for PV and dident finish it
BUT if i can get it all done with a week or so to run her in and get all the problems sorted then ye will run her up the 1/4
be good to see a V6 Vs LET
Thundercats Vs BATMAN
if we do i will get a 2 Big BATMAN logo's made for each side and put them on before the start
OK mate, game on
jagga will be proud of me when I BEAT the caped cruisader
|
3CorsaMeal
Member
Registered: 11th Apr 02
User status: Offline
|
Beardy - Can i be your robin?
|
BeArDy
Member
Registered: 7th Aug 00
Location: Manchester
User status: Offline
|
quote:
Originally posted by Aztec_sxi
any idea of Bhp?
[Edited on 17-01-2005 by Aztec_sxi]
these are the power gains i am expecting off the Supercharger as i dont know what the Gains will be like off the Turbo.....
Standard 3lt V6 with the bits and bobs - 220-230bhp
3lt V6 Supercharged - 300+bhp
3lt V6 Supercharged with NOS - 450+bhp
|
TNM
Member
Registered: 5th Apr 04
Location: Nottingham Drives: VW Tiguan
User status: Offline
|
beardy your a fucking nutter!
Cant wait to see it work.
|
TOMAS
Member
Registered: 7th Aug 02
Location: Nottinghamshire
User status: Offline
|
Beardy arent you concerned about the usaability of all that power, I mean comon 450bhp (maybe) in a very light front wheel drive car. Youre gonna need some special launch control to get of the line... 
Why not put it in a slightly bigger car, but with that power you REALLY godda be thinking about 4wd...
|
3CorsaMeal
Member
Registered: 11th Apr 02
User status: Offline
|
is alot of weight over front wheels tho, should be amazing once its rolling and then foot is planted.
traction and handling is something you adapt too, doesn't make a car undrivable
|
TOMAS
Member
Registered: 7th Aug 02
Location: Nottinghamshire
User status: Offline
|
He'll need shares in Dunlop though...
|
Tom
Member
Registered: 3rd Apr 02
Location: Wirral, Merseyside
User status: Offline
|
And esso
|
