supacook2k
Member
Registered: 26th May 03
User status: Offline
|
my braking has been shit lately and my brakes were makeing a noise had a look at the pad on the disc and there was none, it was just metal. so bought some pads today but dont know how to fit them! could someone explain to me what to do or pics would be great cos i haven't got a clue! they are for the front!
|
thepadd
Member
Registered: 2nd May 04
Location: Nottingham Drives: Corsa C SXI 1.2 16v
User status: Offline
|
get a haynes manual, will walk u through it
prob easier to get a mate to show you, hard to explain.
|
Adam-D
Member
Registered: 11th May 02
Location: Cheshire
User status: Offline
|
haynes is good
take wheel off
take of the spring clip at the front/side bit that faces you
take of the rubber dust caps from behind the caliper undo the two bolts "these are like allen key heads you can get the correct allen socket from halfords"
then pull caliper of, get a g clamp and wind the piston back in keepping a eye on the brake fluid with the resivior lid off
put new pads in boltr back up with new bolts bout £7 from vaux
put the rest back together and your done
|