jr
Member
Registered: 20th May 02
Location: Kent
User status: Offline
|
need to know if theres a special tool that aids putting the rubber bushes in the anti roll bar mounts on a corsa B, as we have tried a press here at work with so much pressure and they wont go in
Help
|
dave17
Member
Registered: 3rd Sep 02
Location: Greater London
User status: Offline
|
ring vaux
|
Greasemonkey
Member
Registered: 17th Apr 02
Location: Drives a Tractor
User status: Offline
|
Washing up liquid but no dought ya tried that one
|
broster
Premium Member
Registered: 6th Dec 02
Location: Drives: E39
User status: Offline
|
the anti roll bar is just mounted with bits of rubber mounted round the roll bad and then clamps to the tie bar?? do you mean the tie bar mounts to the chassis?
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
if its the tie bar bushes, thay are a right pain to do! vaux have a press to do them, they charge £30 a bush to press them in at my local dealer.
after trying to do them for 2 hours and them popping out everytime, i did mine by positioning the bush into place in the bracket and putting the washer over the front one and doing the nut up. easy
|
jr
Member
Registered: 20th May 02
Location: Kent
User status: Offline
|
yes broster
and used a simialr method corsa808 using a VW based special tool
£30 is a rip off
|
broster
Premium Member
Registered: 6th Dec 02
Location: Drives: E39
User status: Offline
|
i took mine to the local garage and they pressed them in for a few quid, joff did his with a vice..........
|