palombo
Member
Registered: 16th Aug 07
Location: Rochdale
User status: Offline
|
This morning i decided to fit some nice new blue LEDs behind my heater controls and into the MFD on my corsa b sxi 16v. When fitting an LED behind the heater control i turned it round and heard a little pop, then my battery light came on. so after i put it all back together, took it for a drive and none of the speedo, petrol gauge, revs or anythin works, and even worseeee no pwer steering  anyone have any idea what it could be? iv checked the fuses and they are fine  ..... any help would be much appreciated thanks, joe.
|
C_O_R_S_A___B
Member
Registered: 17th Jul 06
Location: Thornley, County Durham
User status: Offline
|
i had a similar problem, i took my dash out (i am presuming yours is an electrical dash rather than cable) and i lost all power to speedo revs temp and petrol guage
in the end it was some loose connecting wires somewhere - i took it to an auto-electrician to be honest - didnt cost much as he just reconnected the wires apparently!!
hope that helps a little mate
Jon
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
Its defo a fuse matey.... how have you checked them
|
palombo
Member
Registered: 16th Aug 07
Location: Rochdale
User status: Offline
|
i pulled out number 18 and 14 and just had a look if the wires had split...?
|
Richie
Member
Registered: 3rd Dec 02
Location: Newport, Wales
User status: Offline
|
Just try another fuse... sometimes you cant see
Fuse 18 is the devil.
|
C_O_R_S_A___B
Member
Registered: 17th Jul 06
Location: Thornley, County Durham
User status: Offline
|
mine wasnt a fuse but had same problems but i did take every fuse out individually and check just incase like!!
hope you get it sorted mate
Jon
|
