Jenko_Sport
Member
Registered: 25th May 06
Location: Stoke-on-Trent
User status: Offline
|
Easiest way of putting one on?
|
dean101287
Member
Registered: 22nd Jul 07
Location: Cardiff
User status: Offline
|
take off bolt at top, put strut brace over, put bolt back on. It really is that easy
|
Jenko_Sport
Member
Registered: 25th May 06
Location: Stoke-on-Trent
User status: Offline
|
Best way to remove the bolts then and more importantly how to tighten them back up
|
dean101287
Member
Registered: 22nd Jul 07
Location: Cardiff
User status: Offline
|
At the top of the strut there is a bit where you can put a small spanner on. hold it with that and undo the bolt. When putting it on my strut didnt turn so I didnt have a problem but if it does you have to get a swan neck spanner to go inside and hold the top with the smaller spanner.
|
Jenko_Sport
Member
Registered: 25th May 06
Location: Stoke-on-Trent
User status: Offline
|
What about tightening though as you wont be able to use the same technique
|
dean101287
Member
Registered: 22nd Jul 07
Location: Cardiff
User status: Offline
|
When you put it on the top of the strut sits in the brace yea? Use a swan neck spanner to go inside. Hold the top with a spanner or ratchet maybe? then you can tighten.
|
Jenko_Sport
Member
Registered: 25th May 06
Location: Stoke-on-Trent
User status: Offline
|
Seems quite deep and looks like i wont be able get a swan neck spanner on it.
|
dean101287
Member
Registered: 22nd Jul 07
Location: Cardiff
User status: Offline
|
well try it, it may not turn anyway. another way is to hold it from under the car with mole grips and then tighten the nut up the top
|
Jenko_Sport
Member
Registered: 25th May 06
Location: Stoke-on-Trent
User status: Offline
|
Cheers
|
tom_simes
Show Staff Organiser: South Wales Premium Member
Registered: 12th Jan 05
Location: Undy, Newport Drives: Skoda Octavia vRS estate
User status: Offline
|
Or just use an impact gun, it'll tighten then nut up without moving the piston as it spins the nut too quickly.
That's what I did, worked perfectly - the strut brace was literally fitted in about 4 minutes.
|
Mike
Organiser: North West and North Wales Premium Member
Registered: 20th May 06
Location: nr. Skipton, North Yorkshire
User status: Offline
|
That's what I had to do when I was fitting my rear shocks, they wouldn't budge without it
|
yozzer2008
Member
Registered: 30th Dec 07
Location: stoke on trent .drives deisel corsa van ; )
User status: Offline
|
get the picks up wen fitted
|
Jenko_Sport
Member
Registered: 25th May 06
Location: Stoke-on-Trent
User status: Offline
|
|
dean101287
Member
Registered: 22nd Jul 07
Location: Cardiff
User status: Offline
|
how did it go in the end?
|