MillerCorsa
Member
Registered: 30th Jan 03
User status: Offline
|
Basically.......
On my Corsa, where the wiring for the 2 speakers in the door panel go to the car, they run in a rubber tube, from the car door to the interior...
It consists of a plug, with connectors in it, and I can see no other way of fitting my central locking wires through it, other than taking the end off the plug, and rewiring the speakers, possibly scotch locking them.
Thats my only problem, I can sort the rest, and the motors are actually in my door panels now waiting to be wired up.
Thanks for reading!
Miller
[Edited on 01-04-2003 by MillerCorsa]
|
corsaandy
Member
Registered: 29th Jan 03
Location: Northamptonshire
User status: Offline
|
what i did was from the inside of the car take the wires throught the rubber tube until you come to the conector thing for the speakers then cut a hole in the rubber tube and then in the door just next to the connector and feed the wires through the hole and along the inside of the door to the motors i did that last nite working good nw alot easier
|
jm960326
Member
Registered: 24th Aug 02
Location: Rob Cheshire
User status: Offline
|
I did sumit similar. Made small hole near the rubber bits, then I just siliconed it up around it so its water tight!
|
MillerCorsa
Member
Registered: 30th Jan 03
User status: Offline
|
Excellent, thanks alot, will give it a go!
Miller
|
