red_top_corsa
Member
Registered: 29th Oct 08
Location: ramsgate kent
User status: Offline
|
hi all im having problems with my selecter on my corsa red top ive had the usual bit welded in like needs doin. but when fitted it was hitting my steering rack so foned a friend whos got a red top corsa and he said try bending it foward a lil bit so it dont hit. which it doesnt now. but when all bolted up i can only selcet revesre 1st,3rd, and 5th i cant get 2nd or 4th how have you all fitted yours
|
red_top_corsa
Member
Registered: 29th Oct 08
Location: ramsgate kent
User status: Offline
|
any 1
|
george
Member
Registered: 23rd Feb 08
Location: Rainham, Kent
User status: Offline
|
have you used gearbox spacers? as i didnt use the spacers so i didnt need to extend the selector. all i done was bend the arm forward a little bit and it clears
|
Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
you only exend the selector the same ammount you space the box.. if you havent used a spacer then no need for extending, go over eveything again you might have over looked something.. other than that im not sure.
|
red_top_corsa
Member
Registered: 29th Oct 08
Location: ramsgate kent
User status: Offline
|
yes ive got the spacers on. so only welded a lil bit in, but i did wat you did george but still cant seem to line it up right is there a trick i.e did you put it in a certen gear before you bolted it up.
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
how do you position the gearstick before you tighten it up? have you tried doing it say a touch more forwards?
|
george
Member
Registered: 23rd Feb 08
Location: Rainham, Kent
User status: Offline
|
all i done with mine is a got my mate to hold the gearstick sort of in the centre which would be nuetral and i got underneath and tightened it up with the gearbox in neutral
|
red_top_corsa
Member
Registered: 29th Oct 08
Location: ramsgate kent
User status: Offline
|
i tried that but it still dont seem to work. i can get all gears with my hand on the gear box so no problems there. it just feels like it dont want to come back into gear
|
red_top_corsa
Member
Registered: 29th Oct 08
Location: ramsgate kent
User status: Offline
|
any1
|
corsa_godfather
Member
Registered: 6th May 03
Location: Greenock,Scotland
User status: Offline
|
been told this,not tried it.
go under car and undo linkage bolt,
inside car pull gear gaitor up,you will see a hole on the left hand side of the stick,and another just below it to the left,push stick over so holes line up and put a 5mm drill bit in it.
now in engine bay look down at gearbox and theres a black plug beside where you top up the gear box oil.
remove the plug and put another 5mm drill bit in there and wiggle selector until the drill bit drops down a bit.
now go under and tighten linkage back up.
remove both drill bits and hey presto
as i said i have never tried it but have been told off a few people
[Edited on 19-01-2009 by corsa_godfather]
|
red_top_corsa
Member
Registered: 29th Oct 08
Location: ramsgate kent
User status: Offline
|
thanks mate ill give that a go mate
|