moxon508
Member
Registered: 12th Feb 09
Location: west yorks
User status: Offline
|
i am having trouble with thearths on my loom. i have printed off a layout for the pins in the ecu multi plug.
according to the sheet pin 2 should be the earth for the ignition pulse.
i have nothing in pin 2.
i would be a great help if you have a loom to hand if you could see if your pin 2 is blank. cheers
|
moxon508
Member
Registered: 12th Feb 09
Location: west yorks
User status: Offline
|
pins 1-19 are on the row with the most pins in and pin 1 is the furthest pin from were the wires enter the plug. cheers
|
moxon508
Member
Registered: 12th Feb 09
Location: west yorks
User status: Offline
|
any one got one to hand. you would be doing me a big favour.
|
corsa_chr1s
Member
Registered: 22nd Dec 08
Location: castleford,west yorkshire
User status: Offline
|
where abouts in west yorks are you?
[Edited on 21-03-2009 by corsa_chr1s]
|
moxon508
Member
Registered: 12th Feb 09
Location: west yorks
User status: Offline
|
denby dale.
does any body know it would be a great help. cheers
|
corsa_chr1s
Member
Registered: 22nd Dec 08
Location: castleford,west yorkshire
User status: Offline
|
is it dizzy engine or dis pack
|
moxon508
Member
Registered: 12th Feb 09
Location: west yorks
User status: Offline
|
coil pack
|
corsa_chr1s
Member
Registered: 22nd Dec 08
Location: castleford,west yorkshire
User status: Offline
|
have you checked the coil for a spark?
|
moxon508
Member
Registered: 12th Feb 09
Location: west yorks
User status: Offline
|
no spark. ecu light does not come on. fuel relay and pump do not operate unless i put a wire from earth to the small wires on the fuel relay.then the ecu light comes on. i have checked all the earths on the engine/ gearbox subframe/ fuel rail etc all seem fine. switch live and live ok.
|
corsa_chr1s
Member
Registered: 22nd Dec 08
Location: castleford,west yorkshire
User status: Offline
|
have you checked all the wiring down in the footwell? not just the earths?
|
moxon508
Member
Registered: 12th Feb 09
Location: west yorks
User status: Offline
|
yes all the wiring is matched up colour for colour.
i have looked at a wiring diagram that shows that pin 36 on the ecu is a earth that activates the fuel pump relay. but in my multi plug in goes to pin 46 . i think what i need to do is have a look at a multi plug on a known good one.
|
joey736
Member
Registered: 11th Mar 07
Location: hexham, near newcastle drives: Aurora XE
User status: Offline
|
sounds like a knackered fuel pump relay mate
|
moxon508
Member
Registered: 12th Feb 09
Location: west yorks
User status: Offline
|
ive tried a new one. i think the earth return wire brown/white isnt getting back to the correct pin on the ecu.
|