Kurt
Member
Registered: 23rd Oct 05
Location: Hi
User status: Offline
|
So i've been looking at some new wheels but the offset and widths is confusing me
My standard wheels are 4x100 6.5J 17" et 46
Now the wheels im looking at are Keskin kt1's in 17"
theres a couple of choices in the right pcd, fronts:
4x100 8.5j 17" et 25 and 4x100 8.5j et35
rears:
4x100 10j et20 and 4x100 et25
What would be the best fit? do i need to get the tape measure out and check the clearance?
|
ChazSXi
Member
Registered: 26th Jan 03
User status: Offline
|
id go for et35 fronts and et25 rears
|
aron
Member
Registered: 10th May 07
Location: Ware, Hertfordshire
User status: Offline
|
go for the higher offset wheels in each case and run spacers if they're not 'poked' enough for you...
the lower the offset the more chance you'll need to run negative camber... which i'm guessing you won't want to do if you can help it!?
stretch tyres are a must though
|
ChazSXi
Member
Registered: 26th Jan 03
User status: Offline
|
oh and this is quite handy...
http://www.1010tires.com/WheelOffsetCalculator.asp
says how much extra clearance, or not you have with different sizes to stock
|
Anty
Premium Member
Registered: 19th Mar 08
Location: droitwich
User status: Offline
|
will et37`s fit a corsa?
|
aron
Member
Registered: 10th May 07
Location: Ware, Hertfordshire
User status: Offline
|
mind you... 10j ET25 on the rear, i would imagine you'll have to run -ive camber to get them under...
with that sort of width, you might need to run spacers to avoid hitting the suspension etc
|
aron
Member
Registered: 10th May 07
Location: Ware, Hertfordshire
User status: Offline
|
quote: Originally posted by Anty
will et37`s fit a corsa?
yes - easily with stretched tyres
|
Anty
Premium Member
Registered: 19th Mar 08
Location: droitwich
User status: Offline
|
how much will that be?
|
aron
Member
Registered: 10th May 07
Location: Ware, Hertfordshire
User status: Offline
|
tyres?
what's the spec on the wheels?
|
Anty
Premium Member
Registered: 19th Mar 08
Location: droitwich
User status: Offline
|
five spoke oz mito alloys et37, two with out tyres.. i was thinking 195/50/15s.. but not sure if they would fit.
|
aron
Member
Registered: 10th May 07
Location: Ware, Hertfordshire
User status: Offline
|
how wide are they?
|
Anty
Premium Member
Registered: 19th Mar 08
Location: droitwich
User status: Offline
|
i was told they was 205/50/15`s fitted on them
|
aron
Member
Registered: 10th May 07
Location: Ware, Hertfordshire
User status: Offline
|
what's stamped on the back of the wheel? it will be either 6.5j or 7j or 7.5j etc
|
Anty
Premium Member
Registered: 19th Mar 08
Location: droitwich
User status: Offline
|
7j
|
aron
Member
Registered: 10th May 07
Location: Ware, Hertfordshire
User status: Offline
|
165/50/15 bridgestones are £50 each fitted, nankangs in the same size are around £35 each i think. won't rub one bit with these on
...195/45/15 will rub, let alone 195/50 or 205/50
|
Anty
Premium Member
Registered: 19th Mar 08
Location: droitwich
User status: Offline
|
ahh thanks for the info, so nanks same size?
will they need streching?
[Edited on 13-05-2009 by Anty]
|
aron
Member
Registered: 10th May 07
Location: Ware, Hertfordshire
User status: Offline
|
nankangs are same size yes, a good tyre fitter should do them no probs...
now apologise to kurt for messing his thread up
|