FruitBooTeR
Member
Registered: 18th Jan 07
Location: Wolverhampton Drives: S15
User status: Offline
|
Autovaux dont know which bits I need for the arch bolts and nuts so they have sent me this pik so I can tell them what I need.
Now theres a few bits on the pik which look like the ones I need so which ones would I say -
3,11,5,7,8 all look like the arch screws and nuts.... 
Or if anyone knows the part number for a bag of them let me know 
And if anyone has got the part numbers for -
Rear pre 97 numberplate light lens cover
That would be helpfull too
|
Terry12
Member
Registered: 24th Sep 07
Location: Manchester
User status: Offline
|
I think it's just 5,7 and 8 you need.
7 is used on most of the arch liner and 8 is used on the rear liner right at the end, It's longer because it does the bumper corner and arch too.
I think you only need number 5 nut.
|
Ellis
Member
Registered: 11th Sep 07
Location: Aberdeenshire
User status: Offline
|
7 & 8 look like them to me, can't put my finger on which one is the nut though  sorry
Edit: Terry beats me to it 
[Edited on 03-06-2009 by Ellis]
|
Terry12
Member
Registered: 24th Sep 07
Location: Manchester
User status: Offline
|
quote:
Originally posted by Ellis
7 & 8 look like them to me, can't put my finger on which one is the nut though sorry
Edit: Terry beats me to it
[Edited on 03-06-2009 by Ellis]
|
FruitBooTeR
Member
Registered: 18th Jan 07
Location: Wolverhampton Drives: S15
User status: Offline
|
There is that nut which goes onto a screw which holds the wheel liners in place but theyre a lot bigger than the ones used to hold the arches on and im guessing thats the diff between 3,5,11 but which one is which i have no idea
[Edited on 03-06-2009 by FruitBooTeR]
|
Terry12
Member
Registered: 24th Sep 07
Location: Manchester
User status: Offline
|
quote:
Originally posted by FruitBooTeR
There is that nut which goes onto a screw which holds the wheel liners in place but theyre a lot bigger than the ones used to hold the arches on and im guessing thats the diff between 3,5,11 but which one is which i have no idea
[Edited on 03-06-2009 by FruitBooTeR]
number 5 looks like the standard fitment for the arch threads, 3 and 11 are the same part number and it's called Nut, Special. Fook knows what's special about it though
As FruitBooTeR said it looks like the one that screws onto the welded in threads to hold the plastic inner arch liner in place.
[Edited on 03-06-2009 by Terry12]
|
FruitBooTeR
Member
Registered: 18th Jan 07
Location: Wolverhampton Drives: S15
User status: Offline
|
Do you work at vaux terry?
|
Terry12
Member
Registered: 24th Sep 07
Location: Manchester
User status: Offline
|
No but I practically live there though
|
FruitBooTeR
Member
Registered: 18th Jan 07
Location: Wolverhampton Drives: S15
User status: Offline
|
Dont supose you know the Part number for rear No. Plate light lens?
Not the actual light body just the clear lens? Oh and for the pre 97 (GSI) bumper
|
Terry12
Member
Registered: 24th Sep 07
Location: Manchester
User status: Offline
|
Looks like they're all the same mate.
My EPC is pretty old so is for the pre face Corsa.
Number I get is 90511731.
I replaced mine for my facelift bumper and it only cost a few £.
[Edited on 03-06-2009 by Terry12]
|
Winemaker
Member
Registered: 8th May 07
Location: Down Under
User status: Offline
|
8 is the longer one that holds arch trim to bar, with 3 or 11 as the plastic nut. 6 looks like the one that holds the inner plastic cover under the wheel arches. 7 are the shorter ones that go on the rest of the outer wheel arch trims.
|
FruitBooTeR
Member
Registered: 18th Jan 07
Location: Wolverhampton Drives: S15
User status: Offline
|
I might as well just get some of each as they can only be pense anyway so wont be much if I get them all and also at least ill deffo have the correct ones then
|
Winemaker
Member
Registered: 8th May 07
Location: Down Under
User status: Offline
|
I just pulled this out of a GSi 
The only numbers I can see on the lense is L-00 , then in a circle E1, below that 212 in the centre of the lense and PC on the left of the lense and SWF in a diamond shape on the right hand side of the lense.
On the black plastic base, well that's a different story, on the left it has 90519 268, below that R10W and below that GM on the right hand side it has 393917 and below that SWF in a diamond shape...just trying to help.
|
