nrgdd70
Premium Member
Registered: 13th Nov 09
Location: North Yorkshire
User status: Offline
|
how do i remove dash on corsa need to change the loom and ecu..or will i be able to change ecu and loom without removing dash
tahnks
|
Ellis
Member
Registered: 11th Sep 07
Location: Aberdeenshire
User status: Offline
|
There are a few bolts on the side of the dash that are exposed when the doors are open. You will also need to remove the wipers, scuttle etc to expose the remaining bolts that hold it to the bulkhead. There are probably some others but that's the main ones...
|
nrgdd70
Premium Member
Registered: 13th Nov 09
Location: North Yorkshire
User status: Offline
|
ok is theyre any other way to get the loom out rather than taking dash off
|
Sean-B
Member
Registered: 1st May 07
Location: Wolverhampton Drives: 200SX S14a
User status: Offline
|
You don't need to take the dash out!
The kick panel by your right foot has the ECU behind it. The loom comes through the bulkhead on the top left hand side (looking from the front) you should be able to pull it through.
|
nrgdd70
Premium Member
Registered: 13th Nov 09
Location: North Yorkshire
User status: Offline
|
ive gone from a 1.2 8v to a 1.4 8v sri engine will it just plug str8 in
|
Sean-B
Member
Registered: 1st May 07
Location: Wolverhampton Drives: 200SX S14a
User status: Offline
|
doubt the loom will need changing, just swap the ECU's over
Are the both SPI engines?
|
nrgdd70
Premium Member
Registered: 13th Nov 09
Location: North Yorkshire
User status: Offline
|
no its multi point injection
|
