Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
the front castle nuts on a corsa B are they 30mm???
need to get a spanner on the way home...
|
TOMAS
Member
Registered: 7th Aug 02
Location: Nottinghamshire
User status: Offline
|
Use a socket bud... 30mm I got mine the other day. Fitting new hubs and bearings to mine 2moz afternoon
|
Siberia
Member
Registered: 9th Oct 03
Location: Leprechaun Land Drives : Zafira GSI
User status: Offline
|
socket it is so........
|
stevenford_uk
Member
Registered: 6th Dec 04
Location: Wrexham
User status: Offline
|
yeah, socket is much easier, i had to use a 32mm socket and an air wrench to get mine undone the other day, but the 30mm spanner came in very handy when mr sledge hammer showed up!
needless to say they were tight to get off.
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
A 34" braker bar is what's needed to get the castle nuts off - and possibly somone sitting in the car with the brakes on
|
miles
Member
Registered: 25th Mar 02
Location: plymouth Drives: Astra Sport
User status: Offline
|
stick a 6mm or so spanner between the 2 parts of the caliper through the vents in the disk.
My 30mm socket wasn't deep enough to get hold of a castle nut the other day, so had to take the angle grinder to the end of the shaft and remove about 5mm.
|