Steve Smith
Member
Registered: 28th Nov 00
Location: Doncaster, South Yorkshire
User status: Offline
|
http://www.letstorquebhp.com/calculator.asp
Obvisouly this is only a guide but it has a perfectly reasonable explination, shame it does not take into effect diferences in traction gear ratios weather driver skill but its a bit of fun and lets you see what diffence your mods make
Have a go i will start with my new vectra 2.5 GSI
Power at Flywheel (BHP) : 192
Weight without Driver (KG) : 1400
Power to Weight Ratio (BHP Per Ton) : 139.34
0 - 60 (Secs) : 7.61
0 - 100 (Secs) : 20.43
60 - 100 (Secs) : 12.82
Quarter Mile (Secs) : 16.02
Terminal Speed (MPH) : 88.54
Drag Strip Quarter Mile (Secs) : 15.82
Drag Strip Terminal Speed (MPH) : 90.04
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
Power at Flywheel (BHP) : 204
Weight without Driver (KG) : 900
Power to Weight Ratio (BHP Per Ton) : 230.31
0 - 60 (Secs) : 5.22
0 - 100 (Secs) : 12.87
60 - 100 (Secs) : 7.65
Quarter Mile (Secs) : 13.62
Terminal Speed (MPH) : 102.86
Drag Strip Quarter Mile (Secs) : 13.42
Drag Strip Terminal Speed (MPH) : 104.75
not far off the actual 13.5 i did at 107mph
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
Power at Flywheel (BHP) : 309
Weight without Driver (KG) : 900
Power to Weight Ratio (BHP Per Ton) : 348.85
0 - 60 (Secs) : 4.30
0 - 100 (Secs) : 9.74
60 - 100 (Secs) : 5.45
Quarter Mile (Secs) : 12.59
Terminal Speed (MPH) : 113.67
Drag Strip Quarter Mile (Secs) : 12.39
Drag Strip Terminal Speed (MPH) : 115.79
interesting estimate for phase 3 that its running now. thats a good time
|
bradfincham
Member
Registered: 20th Sep 02
Location: East Of England Drives: Clio 172
User status: Offline
|
Power at Flywheel (BHP) : 168
Weight without Driver (KG) : 980
Power to Weight Ratio (BHP Per Ton) : 174.18
0 - 60 (Secs) : 6.36
0 - 100 (Secs) : 16.59
60 - 100 (Secs) : 10.23
Quarter Mile (Secs) : 14.79
Terminal Speed (MPH) : 94.41
Drag Strip Quarter Mile (Secs) : 14.59
Drag Strip Terminal Speed (MPH) : 96.09
i did a 15.1 only 2nd ever time though 
|
Murga
Member
Registered: 1st Feb 03
Location: West Yorkshire, Drives: Silver Lupo GTi
User status: Offline
|
My Standard Lupo GTi 
Power at Flywheel (BHP) : 125
Weight without Driver (KG) : 1015
Power to Weight Ratio (BHP Per Ton) : 125.13
0 - 60 (Secs) : 8.43
0 - 100 (Secs) : 24.91
60 - 100 (Secs) : 16.48
Quarter Mile (Secs) : 16.90
Terminal Speed (MPH) : 82.38
Drag Strip Quarter Mile (Secs) : 16.70
Drag Strip Terminal Speed (MPH) : 83.78
[Edited on 25-10-2005 by Murga]
|
Steve Smith
Member
Registered: 28th Nov 00
Location: Doncaster, South Yorkshire
User status: Offline
|
Power at Flywheel (BHP) : 165
Weight without Driver (KG) : 1000
Power to Weight Ratio (BHP Per Ton) : 167.65
0 - 60 (Secs) : 6.55
0 - 100 (Secs) : 17.26
60 - 100 (Secs) : 10.71
Quarter Mile (Secs) : 14.99
Terminal Speed (MPH) : 93.18
Drag Strip Quarter Mile (Secs) : 14.79
Drag Strip Terminal Speed (MPH) : 94.82
My old Corsa Guess on Weight
|
chris_uk
Premium Member
Registered: 8th Jul 03
User status: Offline
|
Power at Flywheel (BHP) : 170
Weight without Driver (KG) : 900
Power to Weight Ratio (BHP Per Ton) : 191.92
0 - 60 (Secs) : 5.90
0 - 100 (Secs) : 15.17
60 - 100 (Secs) : 9.27
Quarter Mile (Secs) : 14.33
Terminal Speed (MPH) : 97.20
Drag Strip Quarter Mile (Secs) : 14.13
Drag Strip Terminal Speed (MPH) : 98.95
wont do the corsa 
Power at Flywheel (BHP) : 75
Weight without Driver (KG) : 1000
Power to Weight Ratio (BHP Per Ton) : 76.20
Invalid Entry : Power to Weight Ratio must be between 95 and 700 BHP/Ton
[Edited on 25-10-2005 by chris_uk]
|
PaulW
Member
Registered: 26th Jan 03
Location: Atherton, Greater Manchester
User status: Offline
|
quote:
Originally posted by muppetsport
Power at Flywheel (BHP) : 309
Weight without Driver (KG) : 900
Power to Weight Ratio (BHP Per Ton) : 348.85
0 - 60 (Secs) : 4.30
0 - 100 (Secs) : 9.74
60 - 100 (Secs) : 5.45
Quarter Mile (Secs) : 12.59
Terminal Speed (MPH) : 113.67
Drag Strip Quarter Mile (Secs) : 12.39
Drag Strip Terminal Speed (MPH) : 115.79
interesting estimate for phase 3 that its running now. thats a good time
your weight is wrong, the car weighed 903kg with the X16XE, you will be more like 930Kg or more now with the LET
[Edited on 25-10-2005 by PaulW]
|
PaulW
Member
Registered: 26th Jan 03
Location: Atherton, Greater Manchester
User status: Offline
|
Power at Flywheel (BHP) : 117
Weight without Driver (KG) : 913
Power to Weight Ratio (BHP Per Ton) : 130.21
0 - 60 (Secs) : 8.15
0 - 100 (Secs) : 23.93
60 - 100 (Secs) : 15.78
Quarter Mile (Secs) : 16.63
Terminal Speed (MPH) : 83.37
Drag Strip Quarter Mile (Secs) : 16.43
Drag Strip Terminal Speed (MPH) : 84.80
not bad considering thats the 1/4mile time i got before strippage when the car was aroun 1000kg!
|
Nath
Member
Registered: 3rd Apr 02
Location: MK
User status: Offline
|
Power at Flywheel (BHP) : 157
Weight without Driver (KG) : 1111
Power to Weight Ratio (BHP Per Ton) : 143.58
0 - 60 (Secs) : 7.45
0 - 100 (Secs) : 20.48
60 - 100 (Secs) : 13.03
Quarter Mile (Secs) : 15.90
Terminal Speed (MPH) : 88.10
Drag Strip Quarter Mile (Secs) : 15.70
Drag Strip Terminal Speed (MPH) : 89.62
Ibiza Cupra 1.8T
|
mav
Member
Registered: 19th Jun 01
Location: Scotland
User status: Offline
|
not sure how much the T4 weighs, but to get it to the standard 7 secs to 60 have to put in a weight of 1300
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
930kg? its got rid of all its inside metal bits for rear seats and missing half a side skirt
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
Power at Flywheel (BHP) : 162
Weight without Driver (KG) : 890
Power to Weight Ratio (BHP Per Ton) : 184.94
0 - 60 (Secs) : 6.08
0 - 100 (Secs) : 15.80
60 - 100 (Secs) : 9.72
Quarter Mile (Secs) : 14.52
Terminal Speed (MPH) : 95.85
Drag Strip Quarter Mile (Secs) : 14.32
Drag Strip Terminal Speed (MPH) : 97.58
|
Jake
Member
Registered: 24th Jan 05
User status: Offline
|
wont even let me put 46bhp in
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
doubel it and double the weight, should give same result surely
|
Jake
Member
Registered: 24th Jan 05
User status: Offline
|
cant do that either. Power/weight ratio must be be between 95 and 700 BHP/Ton
|
GazBevan
Member
Registered: 27th Apr 04
Location: N.Wales
User status: Offline
|
Power at Flywheel (BHP) : 90
Weight without Driver (KG) : 903
Power to Weight Ratio (BHP Per Ton) : 101.27
0 - 60 (Secs) : 10.24
0 - 100 (Secs) : 34.30
60 - 100 (Secs) : 24.06
Quarter Mile (Secs) : 18.75
Terminal Speed (MPH) : 73.93
Drag Strip Quarter Mile (Secs) : 18.55
Drag Strip Terminal Speed (MPH) : 75.16
lol, i'll have a bigger engine in there sumday...
|
big eck
Member
Registered: 20th Apr 03
Location: Tullibody. Drives - Audi B8 S4 & Fiesta Zetec-S
User status: Offline
|
My corsa
Power at Flywheel (BHP) : 162
Weight without Driver (KG) : 1050
Power to Weight Ratio (BHP Per Ton) : 156.76
0 - 60 (Secs) : 6.92
0 - 100 (Secs) : 18.53
60 - 100 (Secs) : 11.61
Quarter Mile (Secs) : 15.36
Terminal Speed (MPH) : 91.04
Drag Strip Quarter Mile (Secs) : 15.16
Drag Strip Terminal Speed (MPH) : 92.63
My girls 106 GTi
Power at Flywheel (BHP) : 155
Weight without Driver (KG) : 920
Power to Weight Ratio (BHP Per Ton) : 171.18
0 - 60 (Secs) : 6.46
0 - 100 (Secs) : 17.09
60 - 100 (Secs) : 10.63
Quarter Mile (Secs) : 14.90
Terminal Speed (MPH) : 93.37
Drag Strip Quarter Mile (Secs) : 14.70
Drag Strip Terminal Speed (MPH) : 95.03
|
Cybermonkey
Member
Registered: 22nd Sep 02
Location: Sydney, Australia
User status: Offline
|
my crummy
Power at Flywheel (BHP) : 117
Weight without Driver (KG) : 1250
Power to Weight Ratio (BHP Per Ton) : 95.10
0 - 60 (Secs) : 10.83
0 - 100 (Secs) : 36.45
60 - 100 (Secs) : 25.62
Quarter Mile (Secs) : 19.31
Terminal Speed (MPH) : 72.78
Drag Strip Quarter Mile (Secs) : 19.11
Drag Strip Terminal Speed (MPH) : 73.97
|
iceman
Member
Registered: 22nd Jul 00
Location: Berkshire
User status: Offline
|
Power at Flywheel (BHP) : 290
Weight without Driver (KG) : 1275
Power to Weight Ratio (BHP Per Ton) : 231.10
0 - 60 (Secs) : 4.40
0 - 100 (Secs) : 11.73
60 - 100 (Secs) : 7.32
Quarter Mile (Secs) : 13.11
Terminal Speed (MPH) : 105.75
Drag Strip Quarter Mile (Secs) : 12.71
Drag Strip Terminal Speed (MPH) : 109.22
|
SteveW
Member
Registered: 15th Jul 02
Location: Up in the clouds
User status: Offline
|
Power at Flywheel (BHP) : 280
Weight without Driver (KG) : 990
Power to Weight Ratio (BHP Per Ton) : 287.37
0 - 60 (Secs) : 4.60
0 - 100 (Secs) : 10.64
60 - 100 (Secs) : 6.04
Quarter Mile (Secs) : 12.92
Terminal Speed (MPH) : 110.19
Drag Strip Quarter Mile (Secs) : 12.72
Drag Strip Terminal Speed (MPH) : 112.24
Once its running right it might just make that 
|
Kiddy_Corsa
Member
Registered: 7th Nov 02
Location: Kidderminster Drives: Astra VXR
User status: Offline
|
Weight without driver of a corsa 1.6 16v sport? and are they 106bhp?
|
