M559 WOW
Member
Registered: 4th Feb 04
Location: North Wales
User status: Offline
|
hey guys and galls, ive done a search for this and i know there have been loads of different posts about this in the past, but i got fed up of trying to find the answer im looking for!
basically im building a corsa rallycar, which will have a quickrack in it, and also a LSD which makes for difficult steering! so all i was wondering is, how hard would it be for me to get a EPS column, ecu and loom and fit it to my rallycar (corsa b). would it wire in ok, or are there hidden problems that i have not thought of!?
cheers people
jonny
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
Will be easy. To wire one in you need a rev counter signal, a speedo signal and power. The ECU for it does the rest. The column is a direct swap too apparently.
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
yes, coulmn is a direct swop and the wiring is as ed said. doing exactly the same on mine soon
|
M559 WOW
Member
Registered: 4th Feb 04
Location: North Wales
User status: Offline
|
the speedo i have isnt an electronic one, its cable operated, so i assume this poses a problem yes!?
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
You should have a speed feed going to the MFD on the centre console so matter what...
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
its a shell with no loom iirc though ed
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
Duhhhhh Well, use an electronic speedo then
|
M559 WOW
Member
Registered: 4th Feb 04
Location: North Wales
User status: Offline
|
i have the loom out of the donar car tho, so it wil have a loom eventually!! haha. where does the electronic speedo pick its signal up from?? where is the speed sensor? im just sprayin the inside of the shell at the mo, so i keep popin in to check on this thread when my mate takes over!
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
speed sender is in the gearbox
|
DYL
Member
Registered: 19th May 06
Location: CAERNARFON
User status: Offline
|
@ m559wow....what part of north wales u from? im thinking of rallying my car....where did u get the cage from?
|
Rob E
Member
Registered: 1st Jan 06
Location: Madeley, Stafford....I want to live back in Wales!
User status: Offline
|
Hey John, i didnt know you were on here lol. Is that WOW thats been turned into a rally car? or have u brought a new shell? If u need any wiring diagrams or anything, let me know and ill get the shizzle vauxhall jobbies lol. Good luck with the rally car!
|
M559 WOW
Member
Registered: 4th Feb 04
Location: North Wales
User status: Offline
|
P3boy, ye ive been on ere for years! no mate this is a different shell, wow was too rusty to continue with the project so i stripped it to use it for spares, this is a different shell. and cheers, il let you know if i need anything.
DYL, im from near colwyn bay, i got the shell with the cage already in it as its cheaper doing it that way unless you can weld yourself, which im not very good at!!
|
M559 WOW
Member
Registered: 4th Feb 04
Location: North Wales
User status: Offline
|
oh and cheers dave A, i wil probably convert my car to run with an electronic speedo to enable me to use the EPS system
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
are you using it on the road? do you really need PAS if not?
|
M559 WOW
Member
Registered: 4th Feb 04
Location: North Wales
User status: Offline
|
not on a day to day basis no, but im planning on a fairly powerful 1600 16v engine in it eventually, and that mixd with the diff and qwikrack in the forrests will be pulling the steering all over the place expecially accelerating out of rough hairpins etc, with PAS it wil help me to keep it going where i want it abit better. my mate has a 1300 8v astra with a LSD and qwikrack and the steering on that is a nitemare, at the end of his 1st event his arms were hanging off, he hasnt got any PAS on his
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
yeah, probably is a good idea then
|
ed
Member
Registered: 10th Sep 03
User status: Offline
|
I should really do this to mine. 18's plus a 20XEJ and an F20 = fucking pain in the arse to drive anywhere
[Edited on 11-11-2006 by ed]
|
James R
Member
Registered: 4th Feb 03
Location: 205GTi16/306GTi16
User status: Offline
|
Also if you get the rack from a EPAS corsa (any 1L or 1.2 multivalve) then you'll have a qwikrack too for cheap
Good luck, I'm just havign a 40% plate diff fitted to my 205 at the mo, no powersteering, luckily I'm on track not forest gravel
|
M559 WOW
Member
Registered: 4th Feb 04
Location: North Wales
User status: Offline
|
wel il let you guys all know how i get on when its all up and running!! im guna post up some pics of the inside in general chat in a minute when ive uploaded the pictures! its all sprayed and ready to start building up inside now!
|