AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
I've had enough of it and will be splitting.
15" x 7" ET 49 RimStock ProRace1's - 5.5kg. Good overall condition but need a good clean. Some chips. Good tread Yoko Advan 048R's in Medium Compound. - £600 no offers, pref pickup but can sort postage out.
F20cr with TranX plate Diff (plates are good)- 45/90 ramp - £400 no offers, pref pickup SOLD
Jenvey/QED direct to head throttle bodies (c20xe) with fuel rail, fpr, c20let injectors, throttle linkage/cable, trumpets, DTA ecu (SBD 225 kinda spec map) launch/traction control, Loom - £900 o.n.o - can post.
HiSpec billet 4 pot calipers, 300mm drilled/grooved discs. NEW Mintex 1155 pads. Braided lines. £400 no offers, can post.
V reg Year 2000 shell. Very good condition. Dry stored in garage. Stripped bare but still has all seat mounting brakets. weichers 6 point cage welded in with removable door bars. Harry Hockley front hubs. AVO coilovers. Mtec c20xe mounts. Comes with V5 - £800 o.n.o. pickup pref, but can arrange for delivery at a cost.
Receipts avail for all i think. Sheel will be a 'rolling shell'. Any additional contents of the shell can be discussed, it wont have a steering wheel, but will have the dash 'pod'
[Edited on 13-03-2007 by AK]
[Edited on 15-03-2007 by AK]
|
neo2
Member
Registered: 24th Apr 01
Location: north east durham
User status: Offline
|
1st dibs on F20, with diff call me today mate if you can 07813666512 Rob
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
diff home page http://www.tran-x.com
|
mantamark
Member
Registered: 19th Jun 06
Location: Northumberland
User status: Offline
|
What sort of power were you making with the TB's?
Need anything else to fit them?
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
mark - not an easy question to answer. My engine was far from standard!
If you fit them on a standard cam engine, id say about 190bhp (real, not bullshit figures)
I was making about 210 from memory but this on down on what it should have been (230'ish). I've had multiple probs with blocks, heads along the lines hindering the engine making its potential. Hence packing it in and cutting my extensive losses.
[Edited on 13-03-2007 by AK]
|
mantamark
Member
Registered: 19th Jun 06
Location: Northumberland
User status: Offline
|
Cool, ive got a few tweeks too.
I know its not an easy one to answer, i was just thinking along the lines of the kits the likes of sbd & so on, they say its a xxxkit, and should produce xxxbhp on std engine.
Nothing definate, but i will try & sort some finances out, i needs me some tb's!
thanks for info
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
that is based on cam profile! Go by there base kit... 185or something.
Cams are NOT included in my list above.
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
SBD TypeC manifold: Primaries welded, extra boss, ceramic coated - £400
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
Diff, Gearbox, Clutch, Flywheel, Air Box, Wheel & Tyres and Exhaust all prov sold
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
TB's prov sold.
Will still take interest in them.... deal isnt final until payment is received.
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
i'll consider offers on the block....
87.5mm bore
87.5mm SBD pocketed/forged pistons
polished crank
ARP rod bolts
OE Rods
Cometic metal headgasket
ARP head studs
SBD oil pump, with nylon relief valve
Altenator
Starter Motor
Alloy Sump
brakes now off (no braided line... i had on the last shell.... must of not been swapped over)
[Edited on 15-03-2007 by AK]
[Edited on 15-03-2007 by AK]
|
Graeme
Premium Member
Registered: 26th Jul 04
Location: Northampton
User status: Offline
|
selling the bucket seats?
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
nope, sorry
|
corsa120
Member
Registered: 4th May 02
Location: Northamptonshire
User status: Offline
|
would you take 350 for brakes
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
nope, £400. Already have a buyer in mind, just not confirmed yet. First to pay gets them though. 400 + postage
|
neo2
Member
Registered: 24th Apr 01
Location: north east durham
User status: Offline
|
still like that block lol
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
SBD parts price list + vat
Pistons
PIST-OM87.50XS £406.40
Cams
CM16V2-H284IN £195.00
CM16V2-H278EXS £195.00
Exhaust Manilfod ( i have extras... welded primaries, extra censor boss, and ceramic coated)
EX-M-AST3-S16V £401.17
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
Cams for sale (aprox bugger all miles maybe 300 miles)
The SBD 284 & SBD278 cams have been designed give about 15 -20 BHP* over standard cams, without compromising the drivability of the standard engine, they produce a power band of 2500 - 7500 RPM
CM16V2-H284IN 2.0L 16V Inlet cam 11.4mm lift hydraulic profile 284 degrees duration Pocketed standard piston or Omega
Associated head parts recommended - VLC-6K VLP-9K CMFL-1S VLS-06K
CM16V2-H278EXS 2.0L 16V Short Exhaust cam 11.03mm lift hydraulic profile 278 degrees duration
Associated head parts recommended - VLC-6K VLP-9K CMFL-1S VLS-06K
I have the associated valve caps, springs, seats and followers if needed.
SBD Prices
CM16V2-H284IN £195.00 - Inlet Cam
CM16V2-H278EXS £195.00 - Exh Cam
VLS-06K £102.40 - springs
VLC-6K-S £60.80 - caps
VLP-9K £67.08 - seats
I'd like £275 for the cams, or £350 with seats, caps and springs, OR £375 including 16 followers too, OR £425 including verniers....
[Edited on 16-03-2007 by AK]
|
BAZ 1256
Member
Registered: 16th Mar 04
Location: aberdeenshire
User status: Offline
|
anything up with the block mate?
also would you take less for shell??
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
block - one piston has some deposits on the crown from the valve guide. The bores are fine though.
Shell - not quite yet... got a few interests, but nothing concrete yet.
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
brakes prov sold
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
piston is question
|
AK
Member
Registered: 5th Jul 00
Location: Aberdeen City
User status: Offline
|
shell -
has raised bonnet too, and battery in the boot.
oh... and fuel pump wired to a switch.
|
K3 VMU
Member
Registered: 28th Jul 06
Location: Portlethen, Aberdeen,ken
User status: Offline
|
NOOOOOOO !!!! i m wantin throttle bodies for the nove and the money from selling the corsa is goin on it,but the corsa aint sold....
HOW DEVESTATED
good luck with the sale buddy, ALOT of things i would buy here ,if that F*****G corsa was sold :L:L
|