Solitary_Echo
Member
Registered: 26th May 05
User status: Offline
|
Hey guys this will sound mightily stupid....
I bidded for a Magnex 6x4 on ebay, second hand but in good condition.
Obtained it for £30
Just received it and its actually a Cat back system (Clearly the bloke had no idea what he was actually selling!)
Its not designed specifically for my 1.2, but instead 1.4 upwards. Can i fit this exhaust myself as it has to attach to the Cat? Or is it a welding job? How difficult is it to fit myself? Are there any tutorials?
No garages in my area will fit it for me, because its aftermarket. The only one that did sed i required a stepdown/reducer pipe. Where can i get that from? I cant find one of those n e where either? Is it really required?
Cheers guys
|
Simon_16v
Member
Registered: 14th Aug 06
Location: Yorkshire
User status: Offline
|
Well have a look under your car to see where it joins.
From what i can remember it should be a straight bolt off, and bolt back on job. Thats on my 1.2 8v
|
jaycorsa
Member
Registered: 25th Mar 07
User status: Offline
|
on my 1.4 8v i had a magnex Cat back system, had the middle box welded onto the Cat
|
Solitary_Echo
Member
Registered: 26th May 05
User status: Offline
|
Hmmm i have a strange suspicion that maybe my exhaust isnt Cat back....
Basically the pipe goes from the back box to the little cylindrical box in the centre underneath of the car, roughly inline with the doors....Is this the Cat or the centre box? Now im confused
|
Rob_Corsa
Member
Registered: 4th Apr 02
Location: Derbyshire
User status: Offline
|
when i fitted the cat back magnex system on my 1.6 sport the original system(all one piece) needed sawing just after the cat. Instructions came with the exhaust for how far to go back before cuting. I assume all aftermarket systems require you to cut the system anyhow
|
Mase
Premium Member
Registered: 16th Sep 01
Location: Derbyshire
User status: Offline
|
Is it a 1.2 16v or 8v ?? If its the 8V, I thought the CAT was behind the front wheels, in which case this will fit fine, as all standard exhaust bores are the same apart from the 1.0 12v. If its the 1.2 16v, I believe the CAT is at the front, almost as part of the manifold, so i think you might need some modifying to get it to fit, however, i've never seen a 1.2 16v exhaust, so can't say for sure on that one... either way the backbox should fit the standard system easily, so long as its the standard bore...
Mase
|
Solitary_Echo
Member
Registered: 26th May 05
User status: Offline
|
Ok im beginning to think that its definately not a Cat back then! The pipe goes only to the middle of the car to the cylindircal box. Im not sure how it fits to that box. According to the magnex website tho, that is a full cat back system...If you buy a backbox from them, according to the pictures its just tailpipe and a box. Mine is a tailpipe a box and a pipe about 2ft long with a bend and little slits at the end of the pipe! i Have no idea what i have or where it goes :'(
|
Solitary_Echo
Member
Registered: 26th May 05
User status: Offline
|
Its a 1.2 16v btw!
|
gavin18787
Premium Member
Registered: 22nd Feb 05
Location: Basildon, Essex
User status: Offline
|
I may have the answer mate. I think you have the rear half of the cat back system. I brought this from someone thinking it was a backbox.
I got my centre section cut by the local exhaust place and sleeved.
See my thread for details http://www.corsasport.co.uk/board/viewthread.php?tid=347861
Drives supercharged Tec with torque
|
Solitary_Echo
Member
Registered: 26th May 05
User status: Offline
|
mate can i add you on msn and have a chat! That is exactly what i have! Haha
|