triggz
Member
Registered: 9th Jul 03
Location: Grays, Essex
User status: Offline
|
Basicly i need to know how to wire these up.
Do i cut the 3peice plug in pic and connect one of them wires to the two red and one too the two black ones if so what colors out of the three?
also on the back of the lights where a big three pin plug goes and splits it into two for these lights. Do both the black wires goto center of the light or to side of it(earth i guess)
sorry for the breif description but as u can see my electrical skills aint all that
thanks in advance for any help!
|
Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
What I did was to cut the side light wire and crimp it back together with the halo ring wires with it... Simple really . If you need it I can take a photo of what I did to show you.
|
andyc1234
Member
Registered: 7th Nov 06
Location: Lancashire
User status: Offline
|
headlight and full beam just plug straight on so does the indicator the 4 wires join them into 2 and then conect them to the sidelight wiring i just cut the plug off the wire the for headlight leveling is just floating around on mine might want to change them back one day
|
andyc1234
Member
Registered: 7th Nov 06
Location: Lancashire
User status: Offline
|
not sure what the top left one is for mine just have a rubber plug in that hole
|
Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
quote: Originally posted by andyc1234
headlight and full beam just plug straight on so does the indicator the 4 wires join them into 2 and then conect them to the sidelight wiring i just cut the plug off the wire the for headlight leveling is just floating around on mine might want to change them back one day
Why didnt you put the headlight ajusting motor on the headlights? lol
The top one is for the side lights mate, i found that my side light wire loom was too short so i had to cut it anyway
|
andyc1234
Member
Registered: 7th Nov 06
Location: Lancashire
User status: Offline
|
it was too much effort trying to fit the motor tried pulling it and it wouldnt come off my old lights and i couldnt be arsed breaking them not like i use electric headlight leveling anyway the 4 wires for the angel eyes is all i used for my sidelights
[Edited on 04-04-2007 by andyc1234]
|
Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
quote: Originally posted by andyc1234
it was too much effort trying to fit the motor tried pulling it and it wouldnt come off my old lights and i couldnt be arsed breaking them not like i use electric headlight leveling anyway the 4 wires for the angel eyes is all i used for my sidelights
[Edited on 04-04-2007 by andyc1234]
They are a ball joint, however you can just move (i think up or down) and the ball joint slides out of its whole
|
GavCorsa
Member
Registered: 13th Feb 06
Location: Grantham, Lincs Drives: bmw 323i coupe
User status: Offline
|
i just earthed in engine bay, then ran red wire inside car to a switch and power, not on permanently, can put on when i want
|
Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
mine just come on with side lights
|
triggz
Member
Registered: 9th Jul 03
Location: Grays, Essex
User status: Offline
|
cheers guys i had them fitted n got my headlights as a full beam so drove home tonight flickering in between, seem a bit brighter than b4 even tho there H1 bulbs.
So i just cut the side light wire and use it for sidelight and halo ring, makes sense. also removed the 3plug ball joint thingy but have no where on the lights to use it?!?!
|
triggz
Member
Registered: 9th Jul 03
Location: Grays, Essex
User status: Offline
|
all wired up but no angel eyes connected them to side light plug also but didnt work :/ and advice as i think that should of worked?
|
Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
it should... thats what i did mate, ive no idea what you have done. Maybe you wired it back to front?
|
andyc1234
Member
Registered: 7th Nov 06
Location: Lancashire
User status: Offline
|
the rings are leds so you have to get them conected the right way both sets of wires i just put my sidelights on and poked around till they came on
|