C4RL0
Member
Registered: 30th Sep 06
Location: Cumbria
User status: Offline
|
to have wheels machined down to your correct offset?
I'm looking at some wheels but they only come in some daft offset of about 20, which won't be any good the Corsa.
Does anyone know or heard of anywhere that does this?
|
STEvieXE
Member
Registered: 21st Jan 03
Location: Ballymena N.I.
User status: Offline
|
not that amount, think maybe could get away with 3mm or so. some dont agree with that but i have saw it done, maybe not the safest tho
|
Toby
Premium Member
Registered: 29th Nov 05
User status: Offline
|
you can but is only like three mil so i.e. from a 49 to a 46 you cant add it on which is what you want if you have et 20
|
Mattb
Member
Registered: 2nd Feb 03
Location: Under your sisters bed
User status: Offline
|
taking 29mm of is a bit much tbh
|
STEvieXE
Member
Registered: 21st Jan 03
Location: Ballymena N.I.
User status: Offline
|
ur adding offset to wheels when u skim them, not removing. sounds wierd but true
|
Ben G
Member
Registered: 12th Jan 07
Location: Essex
User status: Offline
|
quote: Originally posted by CorsaB4ever
you can but is only like three mil so i.e. from a 49 to a 46 you cant add it on which is what you want if you have et 20
i thought the whol point of machining wheels is to get the offset higher? not lower
|
Mattb
Member
Registered: 2nd Feb 03
Location: Under your sisters bed
User status: Offline
|
yep, offset is actually measured in - mm.. strange but true
[Edited on 09-06-2007 by Mattb]
|
C4RL0
Member
Registered: 30th Sep 06
Location: Cumbria
User status: Offline
|
so if there is no way i can skim them what else can I do?
Maybe have the arches pulled out? Euro stylee?
|
LeeM
Member
Registered: 26th Sep 05
Location: Liverpool
User status: Offline
|
stretch
|
Kurt
Member
Registered: 23rd Oct 05
Location: Hi
User status: Offline
|
you can get spacers to fit them to corsas these days, think i saw in the lates tv
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
He doesn't want spacers, that'd make them sit out even further.
A 20mm spacer (which an adaptor would be) would make an ET20 wheel have an effective offset of ZERO, that's 49mm too low for a Corsa.
Anyway, 29mm off the face of the wheel is fat too much, unless it's got REALLY thick hubs on the wheel, if it's a normal wheel, it'll just end up thin and weak and the bolt might pull through.
|
M2RTY
Member
Registered: 25th May 01
User status: Offline
|
BUT all wheels come from the same casting and then are machined at factory
wheel A might have 10mm taken off it and wheel B might have 20mm taken off it. taking a further 10mm off wheel A will not do any harm
|
Robin
Premium Member
Registered: 7th Jan 04
Location: Northants Drives: Clio 182 Cup
User status: Offline
|
It depends on the drilling of the bolt holes.
On a wheel with an offset of 20, it might have 10mm between the chamfer and the mounting face, a wheel with a 49mm offset would be the same, so removing 10mm from either would make the bolt pull through.
The holes are drilled for bolts the same length, it's very rare for the bolts to be really long.
|
C4RL0
Member
Registered: 30th Sep 06
Location: Cumbria
User status: Offline
|
quote: Originally posted by Kurt
you can get spacers to fit them to corsas these days, think i saw in the lates tv
I'm wanting to sit the wheel further under the arch, not further out.
Does anyone know where I can get my arches pulled out, it's got to be a top job. It would really suit the wheels I'm after as well if I got some flared arches
|
Kurt
Member
Registered: 23rd Oct 05
Location: Hi
User status: Offline
|
hmm let me have a quick gander in tv, im sure it said hk make something..
edit: it was h&r apparently they make spacers and adaptors
try www.amdtechnik.com
[Edited on 10-06-2007 by Kurt]
|
C4RL0
Member
Registered: 30th Sep 06
Location: Cumbria
User status: Offline
|
i'm not wanting spacers or adaptors! Spacers make them sit out furhter, which I do not want and I don't need adaptors because i can get them in 4 x 100!
I want to know of any proper places that do arch flaring, non of this filler shit.
|
ajscorsa
Member
Registered: 30th Apr 02
Location: Perceton, North Ayrshire
User status: Offline
|
ive got et40 wheels wanna get them machined so its et 45, this be ok u rekon???
|
C4RL0
Member
Registered: 30th Sep 06
Location: Cumbria
User status: Offline
|
duno mate, apparently you can do it about 3mm. So you can get them machined to about et43. I thought 40 would just be Ok though?
|
ajscorsa
Member
Registered: 30th Apr 02
Location: Perceton, North Ayrshire
User status: Offline
|
its fine lowered 40 but rubbed with people in the back -60, plus there 7.5" wide rather that usual 7
|
C4RL0
Member
Registered: 30th Sep 06
Location: Cumbria
User status: Offline
|
what size tyres have you got on them?
|
ajscorsa
Member
Registered: 30th Apr 02
Location: Perceton, North Ayrshire
User status: Offline
|
195 40 16's
|
C4RL0
Member
Registered: 30th Sep 06
Location: Cumbria
User status: Offline
|
solution - strip it out
No ferrying people about so it won't scrub
|
ajscorsa
Member
Registered: 30th Apr 02
Location: Perceton, North Ayrshire
User status: Offline
|
loll nahh, i need the petrol money from them loll
|
IvIarkgraham
Premium Member
Registered: 27th Mar 04
Location: Ellesmere Port, Cheshire
User status: Offline
|
i had mine machined from 42-45 but its not reccomended to take 29mm off
|
ajscorsa
Member
Registered: 30th Apr 02
Location: Perceton, North Ayrshire
User status: Offline
|
how much did i cost mate?
|