F4ntasia
Member
Registered: 8th Feb 08
Location: Wrexham
User status: Offline
|
Any help is appreciated on these two:
1st off, my passenger window (Electric version) on my corsa b will go down about 3/4 of the way, and then slow right to a halt. The door card bulges out slightly and then if you hold the down button the window eventually reaches the bottom. Going up is nice and smooth and quick. I've had the door to pieces, greased and oiled everything I can get to. But still no joy. It worked fine for the first few weeks I had it, and then all of a sudden the problem came. Any ideas?
2nd-ley , The horn has stopped working, again all of a sudden. The fuse is fine, and the horn itself + wiring seem fine. Is there anything else that can be checked by myself before ripping out all the wiring to the buttons and replacing them? Any help appreciated. Cheers, Rob.
|
Ellis
Member
Registered: 11th Sep 07
Location: Aberdeenshire
User status: Offline
|
Wiring seems fine, or is fine? Worth checking mabye?
|
F4ntasia
Member
Registered: 8th Feb 08
Location: Wrexham
User status: Offline
|
Well, as far as I can gather it's fine (Wires all attatched onto horn and not broken) Only place I havn't checked is the connections to the steering wheel. But surely its unlikely the two buttons would fail?
|
Kenzie
Member
Registered: 16th Sep 07
Location: Burnley
User status: Offline
|
Ive got the same problem as you with my passenger window too!
I was going to do what you did but if it doesnt work then i need the help too.
|
Kenzie
Member
Registered: 16th Sep 07
Location: Burnley
User status: Offline
|
anyone?!?!?
|
flybikeslee
Member
Registered: 2nd Jan 07
Location: Liverpool
User status: Offline
|
for the window i had exact smae problem, spray silicone grease down with runner at side of window, put window up and leave 24hours without going up and down. worked a treat on mine
|
F4ntasia
Member
Registered: 8th Feb 08
Location: Wrexham
User status: Offline
|
Cheers, do you mean the vertical runners? or the two metal horizontal ones?
|
Kenzie
Member
Registered: 16th Sep 07
Location: Burnley
User status: Offline
|
I sorted mine yesterday.
The vertical runners at the top of the windows, i put some spray grease inside them.
Then i took off the doorcard, peeled back the weathersheet and applied a generous amount of spray grease to the runner inside the door.
Left it for a couple of hours and the window now goes down a dream!
I think the problem was that the runners were dry and tight.
Have a go and see if this sorts your problem!!
[Edited on 16-02-2008 by Kenzie]
|
F4ntasia
Member
Registered: 8th Feb 08
Location: Wrexham
User status: Offline
|
Nice one for sorting it fella. Unfortunately I have already tried this Unless I need to use shit loads more. I havn't applied grease though, just alot of wd40! Did you do the vertical runners(either side of window) or the horizontal ones(Where the mechs move) Cheers, Rob.
|
Kenzie
Member
Registered: 16th Sep 07
Location: Burnley
User status: Offline
|
WD40 wont really sort this.
Get down to your local motor factor and get some spray grease. Its cheap as chips too and can be very handy!
Spray grease gets a bit thicker as it dries a little so it needs to be left for a few hours. The longer the better really.
Just the vertical runners need doing mate.
If you do the horizontal ones it will leave a horrible mess everytime your window is used.
|
F4ntasia
Member
Registered: 8th Feb 08
Location: Wrexham
User status: Offline
|
Cheers nice one, i'll give that a go in the week. Work in a big factory, and never heard of spray grease! Ta fella
|