te17
Member
Registered: 18th May 08
Location: west london
User status: Offline
|
right long and short of it is i bought a v plate 1.4 16v corsa and cylinder number 4 melted its piston,,, i believe this is the c14xe engine (it carries secondary air injection on the exhaust and egr on the inlet manifold and cylinder head.
so i'm looking to replace it with an astra engine ive been holding, but i only have the engine and ancilleries and loom , no ecu ,
the astra engine has the other type of inlet kind of bends round so i believe this is the x16xe it also has egr on the inlet and secondary air injection on the exhaust,
so can i swap the lot on to the 1.6 head and block bolt it all in and then go find myself an ecu for a 1.6 with egr and matching transponder thanks in advance, as my baby xe knowledge is not great
|
te17
Member
Registered: 18th May 08
Location: west london
User status: Offline
|
right a bit of info the 1.4 is a x14xe with no airflow metre and the 1.6 is a x16xe with no airflow metre , the 1.6 lower inlet has circular ports where as the 1.4 has oval so can i do as above and just use the block and head , ecu plugs are both red and both white
|