gh227
Member
Registered: 27th Aug 08
User status: Offline
|
Does anyone know the flow rates for GM injectors or roughly what BHP they will take?
I have a modified C16XE and am wondering if I need to change the standrd ones for something like red top cream injectors as it is dieing on full throttle. Could it be that the injectors can not flow enough fuel?
|
andyc1234
Member
Registered: 7th Nov 06
Location: Lancashire
User status: Offline
|
doubt it will be injectors. unless you pushing a lot of power out of it
|
Cossie
Member
Registered: 17th May 02
User status: Offline
|
x16xe injectors are 165cc/m at 3 bar !c16xe part number a bit different but I think same flow cc. Maybe you can replace the fuel regulator
|
gh227
Member
Registered: 27th Aug 08
User status: Offline
|
Thanks for that.
If my calculations are correct then 165cc per minute would be good for up to roughly 132bhp so I would be pushing it even if they were working perfectly, which they probably aren't.
I will try changing the regulator first and see if that makes any difference.
|
gh227
Member
Registered: 27th Aug 08
User status: Offline
|
Changed the regulator and it made no difference.
Then changed the injectors for red top cream ones and it made things worse.
No idea why it won't run on full throttle.
|
Cossie
Member
Registered: 17th May 02
User status: Offline
|
what fuel regulator have you used adjustable once and what pressure is set ?
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
injectors are good for 170bhp
you cant just change injectors, would need to be remapped to new injectors
|
gh227
Member
Registered: 27th Aug 08
User status: Offline
|
Thanks guys, will swap them back tomorrow.
|
andyc1234
Member
Registered: 7th Nov 06
Location: Lancashire
User status: Offline
|
could possibly be afm
|
gh227
Member
Registered: 27th Aug 08
User status: Offline
|
Have changed that, made no difference.
|
andyc1234
Member
Registered: 7th Nov 06
Location: Lancashire
User status: Offline
|
is it not throwing up any fault codes
|
gh227
Member
Registered: 27th Aug 08
User status: Offline
|
No fault codes at all, very strange.
Might have a clue what was wrong if it had some.
|