mattcape
Member
Registered: 4th Aug 05
Location: Kings Langley Drives: Astra H
User status: Offline
|
hi all, iam doing a 20xe conversion in my corsa and need to no which pas pump, bracket and belt i need to use
cheers.. Matt
|
scottyp1989
Member
Registered: 29th Jul 07
Location: Warley, West Midlands
User status: Offline
|
probly better off using a 1.0 quick rack, you only need to change to coloumn. or use a saxo epas pump
|
mattcape
Member
Registered: 4th Aug 05
Location: Kings Langley Drives: Astra H
User status: Offline
|
i already have pas on the car so have the rack etc just need to no what pump i need? do i need the c20xe pump?
|
dalejones
Member
Registered: 9th Dec 08
Location: Swansea, Wales
User status: Offline
|
rite before anyonme else confuses you this is what you need, chris astley do the bracket, you have to get there bracket coz the standard c20xe pas bracket sits to low and will hit the corsa anti roll bars, and you just need a c20xe pump (single V)
|
alan-g-w
Member
Registered: 9th Nov 07
Location: Glasgow
User status: Offline
|
quote: Originally posted by dalejones
rite before anyonme else confuses you this is what you need, chris astley do the bracket, you have to get there bracket coz the standard c20xe pas bracket sits to low and will hit the corsa anti roll bars, and you just need a c20xe pump (single V)
So before anyone confuses him, you're telling him to get a pump with a pulley that MIGHT not suit his needs... I've got a multi-V aux belt setup, he might too...
And there are two different C20XE pumps you can use, the only difference between them being that the inlet on one has an elbow and one has a straight connector on it. I can't remember what one you need for the standard setup but I got sent the wrong one without realising and had to put a bit of modified hose in.
[Edited on 30-10-2009 by alan-g-w]
|
dalejones
Member
Registered: 9th Dec 08
Location: Swansea, Wales
User status: Offline
|
wotever then just tryin to help but thats what ul need
|