dean101287
Member
Registered: 22nd Jul 07
Location: Cardiff
User status: Offline
|
Well the car is still a bit tappy and the only thing I think it can be is the lifters. Now, Iv got a set in the garage off another engine so was looking for a bit of advice. What actually causes them to tap?
They all seem in good condition will it be ok to fit them?
Can I clean them first and leave them soak in oil for a few days untill I fit them?
Any tips and advice would be good
|
Linch
Member
Registered: 4th May 06
Location: Whickham, Tyne and Wear
User status: Offline
|
Build up of old oil and carbon in them, causes them not to absorb the valve spring rebound quick enough and friction between the lifter and the head.
[Edited on 31-01-2010 by Linch]
|
dean101287
Member
Registered: 22nd Jul 07
Location: Cardiff
User status: Offline
|
Well my next step was an oil change with a flush. Was just asking for advice on cleaning or treating old ones just incase
|
AlexW
Member
Registered: 25th Oct 08
Location: Essex
User status: Offline
|
Is the engine a X/C16XE?
I when i done the head rebuild, pulled the centre bit out of the bottom, knocked all the oil out and then gave them a airline blow, cleaned it all up and put them back together. Have never tapped
|
Linch
Member
Registered: 4th May 06
Location: Whickham, Tyne and Wear
User status: Offline
|
quote: Originally posted by AW06
Is the engine a X/C16XE?
I when i done the head rebuild, pulled the centre bit out of the bottom, knocked all the oil out and then gave them a airline blow, cleaned it all up and put them back together. Have never tapped
Same technique can be used to turn standard lifters into solid lifters I have been told...
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
can yeh
|
Linch
Member
Registered: 4th May 06
Location: Whickham, Tyne and Wear
User status: Offline
|
I have never tried it my self, Surely cant be as good as proper solids from sbd or the likes?
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
why? same end result really
|
Linch
Member
Registered: 4th May 06
Location: Whickham, Tyne and Wear
User status: Offline
|
I suppose, seems silly really when you can just do this to the standard ones, but people pay silly money for ones from sbd.
|
Nic Barnes
Member
Registered: 5th Apr 04
Location: nowhere near ginger people
User status: Offline
|
i will do mine the cheap way shortly.
|
Linch
Member
Registered: 4th May 06
Location: Whickham, Tyne and Wear
User status: Offline
|
Will you be using a hammer and a extension bar like I have seen?
|
dean101287
Member
Registered: 22nd Jul 07
Location: Cardiff
User status: Offline
|
So clean them up and oil them and they should be fine yea?
|
Linch
Member
Registered: 4th May 06
Location: Whickham, Tyne and Wear
User status: Offline
|
idealy put them in a sonic bath lol
|
dean101287
Member
Registered: 22nd Jul 07
Location: Cardiff
User status: Offline
|
How about a soak in petrol? or will that cause more harm than good?
|
Linch
Member
Registered: 4th May 06
Location: Whickham, Tyne and Wear
User status: Offline
|
just wd40 or somthing or some form of flush fluid like jizer
[Edited on 31-01-2010 by Linch]
|
dean101287
Member
Registered: 22nd Jul 07
Location: Cardiff
User status: Offline
|
Ok, cheers. Just hope it stops the tapping because its getting on my tits
[Edited on 31-01-2010 by dean101287]
|