markx14xe
Member
Registered: 5th Oct 08
Location: grimsby
User status: Offline
|
i have checked the fuses and repaced the relay and its still the same...
|
markx14xe
Member
Registered: 5th Oct 08
Location: grimsby
User status: Offline
|
and all the bulbs are fine aswell
|
Vivasam
Member
Registered: 31st Jan 10
User status: Offline
|
This is most likely to be an earthing problem, if the relay has been changed. Are the bulbs loose fitting, do they wobble about a bit?
To test the earth, take a piece of wire strip a couple of mm at both ends, insert one piece inside and at the same time as you replace the bulb. Do not allow the wire to be in contact with the bottom of the bulb, just down the side. Earth the wire elsewhere and try the indicators again. If they work then fine, create a new earth point. If not you will need to check that you are getting power to the holder itself. For this you need a voltmetre of some description.
|
markx14xe
Member
Registered: 5th Oct 08
Location: grimsby
User status: Offline
|
bulbs are fine just stop working on there own, they flash when i lock my car and unlock tho with the alarm :S
|
