Hodgy
Member
Registered: 29th Dec 09
Location: Felling, Tyne and Wear
User status: Offline
|
hi people.....
i have these plugs and i dont know where they go what are they for:
grey plug
brown and yellow wire
blue and red wire
grey plug
thick brown wire
red and white thick wire
also i have 2 wires that connect to the black plug from the ecu:
thick red wire is constant live
thick black wire ignition live
where would these be the best place to wire up ?? becuase i dont have these in the loom becuase some one butchered the wire loom
thanks
hodgy
ps also have to fault codes:
p0412: secondary air injection system switching valve A circuit malfunction
p1405: exhaust gas recirculation valve- malfunction
these are bringing eml on how do i get this off ??
|
scunnylad
Member
Registered: 11th Jun 08
Location: Ashby, North Lincolnshire
User status: Offline
|
the grey plug with the thick brown and red and white looks like your fan plug. the othere could be anything, where does it sit near ? cts ?
also to get rid of the fault codes disconnect the battery for 30 min then recheck, if there still there than u will need to look further into the 2 faults
|
shaunmods
Premium Member
Registered: 12th Mar 07
Location: Glascote, Staffordshire
User status: Offline
|
Those two connectors are for the secondary air pump mate. Has the secondary air pump been removed?
Mine has been removed and blanked off and caused my EML to stick on as well. I've not yet found a solution to get the light off. I tried having the codes wiped etc but nothing.
The EGR is this:
http://www.tuneparts.co.uk/prod/egr1.jpg
Your best bet would be to remove it and give it a good clean out because they get clogged with shit.
|
Hodgy
Member
Registered: 29th Dec 09
Location: Felling, Tyne and Wear
User status: Offline
|
so have you left that white plug unplugged and left
or does it go to a solenoid on the passenger side inner wing connected with a vaccuum pipe or somit ??? its a grey solenoid ?????
and the egr valve is still in and still connected but i have blocked the exhaust manifold one off and have no black secondary bump thing lol
and i will try takin it off and cleaning it mate
[Edited on 05-06-2010 by Hodgy]
[Edited on 05-06-2010 by Hodgy]
|
