basslinecorsa
Premium Member
Registered: 15th Jul 09
Location: Gravesend
User status: Offline
|
I work for Hi-Spec Motorsport who make some monster brakes, take a look: http://www.hispecmotorsport.co.uk/
Incase you don't know Radical tested Brembo, AP Racing and Hi-Spec on their cars and we out performed the rest
on a like for like basis. as a result we now supply them with their brake systems.
(this test was on the billet 4 set up)
After badgering the gov I have managed to get us a pretty sweet deal. Basically if I can get enough interest (20+ ppl)
I can offer a massive discount .... 20-25% depending on numbers.
These don't have to be for a corsa, just 20+ people ordering through here at the same time.
the standard kit for a corsa would be the 285mm billet 4 which is £680.52 inc VAT
this includes:
grooved & vented discs, calipers, carriers, braided hoses, pads & fluid. (everything you need)
+ bolts, washers & nuts etc..
but through the group buy we would be looking at £510.39 so a saving of £170!
so take a look at the site and if your interested let me know.
ooh and if you guys want I can get the calipers made with a custom logo on for a one off fee of £100
but this requires a minimum of 10 pairs of calipers. so if 10 people wanted vauxhall or corsasport written
on the calipers it would only be £10 extra each
[Edited on 05-06-2010 by basslinecorsa]
Project Scarlett - http://www.corsasport.co.uk/board/viewthread.php?tid=661417
|
Ste
Premium Member
Registered: 5th Mar 03
Location: Taif, Saudi Arabia
User status: Offline
|
Is this the economy kit? I take it the one you are using as an example has one piece discs?
Also, are the piston sizes calculated for standard master cylinders or would the master cylinder need upgrading too?
I could be interested on a set of 300mm for a 206 GTi but your site doesn't list them
I would rather lose by a mile because i built my own car, than win by an inch because someone else built it for me.
|
basslinecorsa
Premium Member
Registered: 15th Jul 09
Location: Gravesend
User status: Offline
|
no the economy kit has plain rotors and vibro finished calipers and doesn't come with pads hoses or fluids. the example above is for the standard kit, which has grooved or drilled rotors and coloured calipers. yes the 285mm discs are one piece, the two piece are 300mm and up. they are a bit more expensive though ..... the existing master cylinder will be fine. All kits are priced by size and spec not on the vehicle as they are all custom built to order. So a 206 gti shouldn't be a problem. I will ask the gov on monday to make sure though.
[Edited on 05-06-2010 by basslinecorsa]
Project Scarlett - http://www.corsasport.co.uk/board/viewthread.php?tid=661417
|
nick_sri
Member
Registered: 5th May 09
Location: Crewe , Cheshire
User status: Offline
|
id be intrested in this. so ill put my name down
|
connollygt30
Member
Registered: 16th Nov 08
Location: West Lothian
User status: Offline
|
£510 including vat and delivery?
|
gazza808
Member
Registered: 30th Jun 08
Location: Peterborough
User status: Offline
|
I'm after some 4pots that will fit under 13's?
|
andyc1234
Member
Registered: 7th Nov 06
Location: Lancashire
User status: Offline
|
Im interested in just calipers to fit a Corsa already have 300mm discs
|
bigron1988
Member
Registered: 29th Aug 09
Location: Southport, Merseyside
User status: Offline
|
defo intrested ,the hi spec brakes are on my to buy list already
|
lostboy
Banned
Registered: 29th Jan 09
Location: Durham
User status: Offline
|
quote: Originally posted by gazza808
I'm after some 4pots that will fit under 13's?
Probably not, a mate of mine has wilwoods and they only just fit under his 14's, had to take the weights off as they were catching on the caliper (the wheels were are only used for the strip though)
|
gazza808
Member
Registered: 30th Jun 08
Location: Peterborough
User status: Offline
|
Yeah I assume they'll be custom, as my mate has 6pots under 12's on his mini,
|
Toby
Premium Member
Registered: 29th Nov 05
User status: Offline
|
Don't mean to rock the boat but have hard of some very negative reviews of hi-spec do you have a link to that review. Also what price do they come for a fiesta st
|
basslinecorsa
Premium Member
Registered: 15th Jul 09
Location: Gravesend
User status: Offline
|
quote: Originally posted by Toby
Don't mean to rock the boat but have hard of some very negative reviews of hi-spec do you have a link to that review. Also what price do they come for a fiesta st
no link to review as there isn't one ... radical tested all three and ours were better and now we make all there brakes. Prices are on the website, just minus the 25% discount
quote: Originally posted by andyc1234
Im interested in just calipers to fit a Corsa already have 300mm discs
should be fine just let me know what size wheel your running and how thick the discs are.
quote: Originally posted by gazza808
I'm after some 4pots that will fit under 13's?
we might be able to do this for you, is it a corsa on steelies? (steels have different clearances to alloys)
quote: Originally posted by connollygt30
£510 including vat and delivery?
inc vat but delivery is on top, I will find out how much tomorrow but should be about £20
Project Scarlett - http://www.corsasport.co.uk/board/viewthread.php?tid=661417
|
connollygt30
Member
Registered: 16th Nov 08
Location: West Lothian
User status: Offline
|
So can you get pics and sizes of the brakes available
|
C2VXL
Member
Registered: 25th Apr 02
Location: Aberdeen.
User status: Offline
|
No offence bud but i think you'll be struggling to get 20 plus buyers. BUT if you do i'd be interested.
|
basslinecorsa
Premium Member
Registered: 15th Jul 09
Location: Gravesend
User status: Offline
|
well I thought I would offer the chance ... if there are less people then there wont be so much of a discount (15% if its over 10).
connollygt30 I don't have pics but I will see If I can get any from work .... you can have any size you want from the list on the website, so long as you can fit it under your wheel.
Project Scarlett - http://www.corsasport.co.uk/board/viewthread.php?tid=661417
|
connollygt30
Member
Registered: 16th Nov 08
Location: West Lothian
User status: Offline
|
Any size for £510?
|
basslinecorsa
Premium Member
Registered: 15th Jul 09
Location: Gravesend
User status: Offline
|
this is a rough guide to what you can fit under your wheels:
15" up to 285mm Big Disc Kit / Billet 4 Conversion
16" up to 300mm Big Disc / Billet 4 Conversion
17" up to 325mm Billet 4 / Monster 4 Conversion or 335mm Monster 4 / Monster 6 Conversion
18"+ up to 360mmm Monster 4 / Monster 6 / Mage Monster Conversion or 380mm Mega Monster Conversion
Project Scarlett - http://www.corsasport.co.uk/board/viewthread.php?tid=661417
|
basslinecorsa
Premium Member
Registered: 15th Jul 09
Location: Gravesend
User status: Offline
|
quote: Originally posted by connollygt30
Any size for £510?
no bigger is more expensive, smaller is cheaper. I just used a 285mm as an example as most people on here will be running 15's on a corsa and that is the largest kit you can fit under them. there is a price list here:
http://www.hispecbrake.co.uk/Price%20Lists/Billet%20Conversions.htm
above prices are for a billet 4 caliper set up
Project Scarlett - http://www.corsasport.co.uk/board/viewthread.php?tid=661417
|
spikedjack
Member
Registered: 16th Oct 08
Location: wolverhampton/cannock
User status: Offline
|
i've just fitted a billet 4 kit to my Corsa C, with mintex 1144's
what other pad options are available as ideally i'd like some ds2500's, are they available?
|
Limecat
Banned
Registered: 25th Jun 05
Location: The Internet
User status: Offline
|
You have absolutely ZERO chance of getting 20 people from this site, the majority of people are timewasters.
I also would express an interest in something that will fit under a 13" wheel, in my case for a Rover Metro but as you won't get 20 people it seems pointless to show willing.
|
spikedjack
Member
Registered: 16th Oct 08
Location: wolverhampton/cannock
User status: Offline
|
Great fitting kit, best pedal feel i've ever felt compared to a fair few set ups and they stop well however the pads i dont rate much...
|
basslinecorsa
Premium Member
Registered: 15th Jul 09
Location: Gravesend
User status: Offline
|
yea the kit comes with standard road pads unless you ask (and pay) for fast road or race pads. I will get you a list of options available.
Project Scarlett - http://www.corsasport.co.uk/board/viewthread.php?tid=661417
|
gazza808
Member
Registered: 30th Jun 08
Location: Peterborough
User status: Offline
|
quote: Originally posted by basslinecorsa
quote: Originally posted by gazza808
I'm after some 4pots that will fit under 13's?
we might be able to do this for you, is it a corsa on steelies? (steels have different clearances to alloys)
haven't bought the wheels yet as no point if i can't get a decent set of brakes too put under them. but probs weller steelies though.
|
bigron1988
Member
Registered: 29th Aug 09
Location: Southport, Merseyside
User status: Offline
|
im using cav turbo rims and pro race 1.2s both in 16s, what size would you recomend i get (5 stud btw)
|
P1CK4D
Member
Registered: 19th Jun 06
Location: Around Essex Somewhere
User status: Offline
|
Good idea and everything but this man does speak sense. [
quote]Originally posted by LETGSI16V
You have absolutely ZERO chance of getting 20 people from this site, the majority of people are timewasters.
Plus I know I paid less than that for my Wilwood 4pots that were on my LET and that wasn't in any kind of group buy.
|