Sims
Member
Registered: 15th Aug 03
Location: Bath/Bristol area Drove: 1994 Corsa SRi Now: VTR
User status: Offline
|
Not been on here for years! But selling my vectra GSi as i'm moving and have no space for parking.
I have a JL Audio E4300 amp for sale which is in excellent working condition. I've had it powering two JL W10s which with this AMP has been a good combination.
The pair of JL W0s need to go too. not look for much for these.
I believe this amp is discontinued now but full spec can be found at (http://mobile.jlaudio.com/pdfs/eSeries%20Amps/e4300.pdf).
Looking for £100+. could post but would prefer pick-up.
Overview of the spec...
Class AB 4-Channel Amplifier
Absolute Symmetry Class AB Circuit
Differential, Noise Cancelling Input Topology: RCA jack inputs(low-level) and multi-pin jack(high-level)
On-board crossover: State-variable, 12dB/octave Butterworth with continuously variable cutoff frequency selection from 50-200 Hz. Configurable as Low-Pass or High-Pass
Preamp Output: Pass-through type
CEA-2006 Compliant
RMS Power Rating (14.4V):
4 ohms: 70 watts x 4 chan.
2 ohms: 110 watts x 4 chan.
Bridged (4 ohms): 220 watts x 2 chan.
Bridged (8 ohms): 140 watts x 2 chan.
RMS Power Rating (12.5V):
4 ohms: 45 watts x 4 chan.
2 ohms: 75 watts x 4 chan.
Bridged (4 ohms): 150 watts x 2 chan.
Bridged (8 ohms): 90 watts x 2 chan.
Frequency Response: 10 - 25kHz
Damping Factor: >200 @ 4 Ohms / 50Hz, >100 at 2 Ohms/50Hz
S/N Ratio: >104 dB referred to rated power(A-weighted, 20Hz-20kHz noise bandwidth)
Input Range: 200mV - 8V RMS
Bass EQ: +6dB Fixed Frequency, Fixed 'Q' with port for optional remote bass control
Slew Rate: +- 22V/us
Dimensions: 13.8" L x 9.25" W x 2.36" H
|