tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
need to no the pipe from the front to the back just the standard size, so i can make a replcment pipe for were the silencer is need to no this quick time
|
Phillips_91
Member
Registered: 20th Jan 10
Location: Blackpool. Drives: Sapphire Black Mk4 Astra 1.8
User status: Offline
|
what size engine, i'll go pull a part out of stock and measure it for ya, u2u me registration if ya want, will be more acurate
|
Ste
Premium Member
Registered: 5th Mar 03
Location: Taif, Saudi Arabia
User status: Offline
|
You usually measure exhausts by their diameter as opposed to the circumference.
I would rather lose by a mile because i built my own car, than win by an inch because someone else built it for me.
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
u2u'd mate
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
Found it out thanks to phillips cheers mate great help
|
Phillips_91
Member
Registered: 20th Jan 10
Location: Blackpool. Drives: Sapphire Black Mk4 Astra 1.8
User status: Offline
|
no problem mate
any other info you need just drop me a message
|
am4nf
Member
Registered: 27th Jul 08
Location: South Ayrshire Drives: Corsa Sport
User status: Offline
|
better posting said measurement in here for future reference, so that when someone utilises the search function and find this thread, they dont need to u2u or make another to find out what the answer is
|
Phillips_91
Member
Registered: 20th Jan 10
Location: Blackpool. Drives: Sapphire Black Mk4 Astra 1.8
User status: Offline
|
42mm outside diameter on a 1 litre corsa centre pipe, using part number gm304 iirc will double check that at work again tomorrow and edit if neccesarry
|
tomo2k9
Member
Registered: 17th Sep 09
Location: Birmingham/ wednesbury
User status: Offline
|
So if I make a tube 35mm , I wil be able to cut out the silencer in the middle and weld the tube I make in?
|
Phillips_91
Member
Registered: 20th Jan 10
Location: Blackpool. Drives: Sapphire Black Mk4 Astra 1.8
User status: Offline
|
your better off with a bigger bore, so internal bore of 42.5 mm or 43 for simplicity, and clamp it in dont weld, thats what ive done that way if i get a fussy mot man then i have my silencer on a hook at work and i can put it straight back on, dont put a smaller bore in as it will restrict the flow, theres a reason that car came out the factory with that size exhaust
[Edited on 07-01-2011 by Phillips_91]
|