Mr-SEH
Member
Registered: 10th May 10
Location: Dark places
User status: Offline
|
As above lads how hard. I done my own conversion but mine aint the same il have the hole car which the 1.4 will come from. Wiring side of things will it be easier to just swap the hole dash loom and put into 1.0 ? rarther than cutting soldering etc. 
thanks
|
dannyboolahlah
Member
Registered: 16th Feb 10
Location: Wigan
User status: Offline
|
Spot on. Best way to do it is to swap the dash loom over.
|
shaunmods
Premium Member
Registered: 12th Mar 07
Location: Glascote, Staffordshire
User status: Offline
|
If you've got a poverty spec 12v without EPAS then yeah its easy to change the dash loom for a plug and play one imo
|
Mr-SEH
Member
Registered: 10th May 10
Location: Dark places
User status: Offline
|
Cheers lads. How hard is it to get dash out?
|
Ellis
Member
Registered: 11th Sep 07
Location: Aberdeenshire
User status: Offline
|
Not that hard, take the scuttle off and that exposes the biggest bolts, the others are smaller ones holding the various bits of trim on which can restrict you getting the dash off.
|