johnhara1
Member
Registered: 19th Oct 06
Location: Newcastle upon Tyne
User status: Offline
|
I have wanted a little 1.5TD for a while now. Came across a one with 185k on the clock with no tax or test and the bodywork a bit rough advertised at £350ono. It was local so i went and viewed it.
Got there and noticed it's sitting on 14" VW Polo steels, a set of 5 with excellent tyres so that was a good start. Got underneath and noticed it was rock solid, no corrosion around the usual places, seat anchor points solid etc so all good.
Checked the engine bay over, no oil leaks anywhere, not even from the alternator. No leaky injectors, engine bay is bone dry.
Started it up from cold, 1 preheat and she's alive. No stuttering, no smoke.
Took the car around the block, noticed the hand brake had no effect whatsoever and the pedal travel was horrendous . We agreed a price and i was away.
And that's how it started...........
[Edited on 20-06-2013 by johnhara1]
[Edited on 26-06-2013 by johnhara1]
[Edited on 19-09-2013 by johnhara1]
[Edited on 19-09-2013 by johnhara1]
[Edited on 28-11-2013 by johnhara1]
|
johnhara1
Member
Registered: 19th Oct 06
Location: Newcastle upon Tyne
User status: Offline
|
Drove her straight home and stripped the rear brakes down. The shoes were like new which was a bonus, so i adjusted the brakes up nice and snug on the drum and that was that sorted.
Handbrake now excellent and no more pedal travel. Cost me nothing.
Last MOT had advisories for slight play in both rear wheel bearings. That slight play was now quite a bit play so i put two new bearings in that i happened to have lying around in the garage.
With that done, it was MOT time. She flew straight through with no advisories
[Edited on 19-09-2013 by johnhara1]
|
johnhara1
Member
Registered: 19th Oct 06
Location: Newcastle upon Tyne
User status: Offline
|
I found an old K&N cone filter in the garage so i stuck that on for a laugh.
Ordered a Bleed Valve and cheap boost guage off of eBay.
Boost guage:
http://www.ebay.co.uk/itm/281097236645?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Bleed Valve:
http://www.ebay.co.uk/itm/380509245395?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
And then i cut the CAT out.
I then parked her up for a week while the parts arrived and the end of the month approached so i could tax her.
[Edited on 20-06-2013 by johnhara1]
|
johnhara1
Member
Registered: 19th Oct 06
Location: Newcastle upon Tyne
User status: Offline
|
The parts arrived so i got started using this guide.
http://www.corsasport.co.uk/board/viewthread.php?tid=35931
Bleed Valve Fitted:
Boost Gauge Fitted: (Notice the high idle......)
It was very easy to follow. Set the boost to 1.0BAR as advised.
Taxed the car that day then took her for a blast up and down the motorway pissing myself laughing all the way.
Pulls so hard compared to before, chucking out loads of black smoke and you can hear the spool much more now.
Then i heard a metallic noise and the car started boosting to 1.25BAR (19psi) so i took her home to check her over.
I hadn't tightened to the bleed valve properly once set so it had unscrewed itself and fell off
I've just left it and done 500 mile so far as it is without any issues.
[Edited on 20-06-2013 by johnhara1]
[Edited on 19-09-2013 by johnhara1]
|
nibnob21
Premium Member
Registered: 16th May 10
Location: South Derbyshire
User status: Offline
|
I'd be quite keen for one of these at some point, they sound pretty fun. Is it 3 door or 5 door? The 3 door TDs are pretty rare nowadays.
MX5 Project Thread
|
carl roper
Member
Registered: 17th May 09
Location: Newport Shropshire
User status: Offline
|
Get it up to 2bar
|
johnhara1
Member
Registered: 19th Oct 06
Location: Newcastle upon Tyne
User status: Offline
|
It's a 3 door
If I relocate the air filter, fit an intercooler and block the boost safety valve on the inlet I'm hoping to turn it up a bit more. Not sure about 2Bar though!
I'm going to lower it and fit a set of 2.0 brakes aswell.
|
Generation
Member
Registered: 7th Jul 09
Location: Essex
User status: Offline
|
This projects needs pics tbh
|
Simon_16v
Member
Registered: 14th Aug 06
Location: Yorkshire
User status: Offline
|
quote: Originally posted by Generation
This projects needs pics tbh
|
johnhara1
Member
Registered: 19th Oct 06
Location: Newcastle upon Tyne
User status: Offline
|
Tomorrow ill put some up.
|
carl roper
Member
Registered: 17th May 09
Location: Newport Shropshire
User status: Offline
|
quote: Originally posted by johnhara1
It's a 3 door
If I relocate the air filter, fit an intercooler and block the boost safety valve on the inlet I'm hoping to turn it up a bit more. Not sure about 2Bar though!
I'm going to lower it and fit a set of 2.0 brakes aswell.
was running my 1.7td at 2 bar for over a year, engines now apart for a T25
|
Jamie-C
Member
Registered: 3rd Jun 08
Location: Ballycastle
User status: Offline
|
I hunted for ages for a 1.5td over here and must have viewed about 5 and every one of them was a dog, there pretty nippy for what they are
|
CORSAb GSi rep
Member
Registered: 4th Jan 13
Location: llangollen
User status: Offline
|
Any pics ???
|
johnhara1
Member
Registered: 19th Oct 06
Location: Newcastle upon Tyne
User status: Offline
|
Idle now sorted:
I've done 1700 miles in the car now with 1.25BAR without an issues so definitely going to wind her up to 2BAR now.
No Smoke, No Poke...........
[Edited on 20-06-2013 by johnhara1]
|
johnhara1
Member
Registered: 19th Oct 06
Location: Newcastle upon Tyne
User status: Offline
|
Cheap lowering kit ordered:
http://www.ebay.co.uk/itm/230566677837?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
|
carl roper
Member
Registered: 17th May 09
Location: Newport Shropshire
User status: Offline
|
What exhaust are you running?
|
tom130691
Premium Member
Registered: 13th Sep 08
Location: Daventry
User status: Offline
|
wouldnt mine one of these tbh kinda cool
|
johnhara1
Member
Registered: 19th Oct 06
Location: Newcastle upon Tyne
User status: Offline
|
It's on the standard exhaust at the min. I will get a slightly larger bore exhaust made up.
The best thing about this car is it still does 90miles to £10 diesel driving normally and still 70 miles kicking its head in.
|
carl roper
Member
Registered: 17th May 09
Location: Newport Shropshire
User status: Offline
|
Want to buy a down pipe back 2.5" system?
|
johnhara1
Member
Registered: 19th Oct 06
Location: Newcastle upon Tyne
User status: Offline
|
I was hoping you'd say that. How much delivered to Newcasle mate?
|
carl roper
Member
Registered: 17th May 09
Location: Newport Shropshire
User status: Offline
|
Will measure it and get a quote and pm you
|
johnhara1
Member
Registered: 19th Oct 06
Location: Newcastle upon Tyne
User status: Offline
|
Springs turned up today:
I only had an hour free so just did the backs today:
I'm going to hammerite the wheels black, ill do the drums and calipers at the same time to tidy it up a little bit.
I'll do the fronts tomorrow.
|
johnhara1
Member
Registered: 19th Oct 06
Location: Newcastle upon Tyne
User status: Offline
|
Fronts done:
How she sits now:
[Edited on 26-06-2013 by johnhara1]
|
johnhara1
Member
Registered: 19th Oct 06
Location: Newcastle upon Tyne
User status: Offline
|
Messing about
|
AaronTD
Member
Registered: 5th Jun 13
Location: Ballymena
User status: Offline
|
do you see much difference in it? thinking about doing a few small things to my own
|