Aidan-Fleming
Member
Registered: 17th May 08
Location: Westhill, Aberdeenshire
User status: Offline
|
Basically coming to final steps of my let conversion. Quite handy with wiring but can't seem to sus this out.
I've done all the wiring in the footwell. And I'm left with the single black wire which is the ignition live from old 1600 engine.
On my let loom there's ment to be a black wire after injector rail that I connect it to but there's not at all. I've stripped loom back and nothing there. So where can I connect the wire in footwell to on my let loom?
Say the wire was there on let loom, what does it actually go into?
Maybe I can run my own wire and solder it?
|
Ian
Site Administrator
Registered: 28th Aug 99
Location: Liverpool
User status: Offline
|
Does the LET loom need ignition switched live anywhere? If not then there's nothing for it to connect to.
|
Aidan-Fleming
Member
Registered: 17th May 08
Location: Westhill, Aberdeenshire
User status: Offline
|
In the footwell I had a thick red, and a thick red on my let loom that went to battery. So connected them. Is that the switxhed live? Or ignition live?
The thin black wire from the original engine ecu plug, that gets wired to the black wire off the end of the let loom just after injectors. But I don't have that wire. So where do I wire the thin black in footwell to? As I néed that to start engine
|
Aidan-Fleming
Member
Registered: 17th May 08
Location: Westhill, Aberdeenshire
User status: Offline
|
?
|
--ToM--
Member
Registered: 23rd Nov 07
Location: Wirral
User status: Offline
|
Anything that becomes live when the ignition is on just go off that
|
Aidan-Fleming
Member
Registered: 17th May 08
Location: Westhill, Aberdeenshire
User status: Offline
|
It's okay mate got another loom cheers
|
