Ricky352
Member
Registered: 6th Apr 07
Location: Lisburn, N.I.
User status: Offline
|
I'm in the process of building a large shed of about 19 feet in length and about 10 feet wide. I've concreted in some fence posts and have been applying tongue and groove weatherboard between these. I'm going to use it to store my Corsa, bicycle etc etc.
I've no real experience at this sort of stuff, so was wondering if anyone could give me some ideas of what to do for the roof?
I was originally thinking of perspex, but it can be dear enough for the proper stuff and the cheap stuff isn't great. Then I thought would this let a lot of light in and fade paintwork on my Corsa etc?
Anyone built their own before or have any recommendations I could consider?
[Edited on 29-04-2016 by Ricky352]
[Edited on 29-04-2016 by Ricky352]
|
IvIarkgraham
Premium Member
Registered: 27th Mar 04
Location: Ellesmere Port, Cheshire
User status: Offline
|
You looked into prefab garages?
Probably cheaper and easier to get one of those
|
Andrew
Member
Registered: 5th May 04
Location: Skoda Octavia Estate, Ford Puma
User status: Offline
|
Felt?
My old man built a couple of sheds. 25 years still solid. His are sat on flags on a slight dip that allows water to run.
My lockup is the same with a felt roof.
|
pow
Premium Member
Registered: 11th Sep 06
Location: Hazlemere, Buckinghamshire
User status: Offline
|
THose corrugated sheets I imagine?
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
Shuttering ply and felt.. That's what I used to cover a nearly 4x8m structure
|
nibnob21
Premium Member
Registered: 16th May 10
Location: South Derbyshire
User status: Offline
|
Make sure you use some sort of insulation. If you just stick with a single skin of corrugated metal or perspex you'll get condensation that'll drip onto whatever's below it.
I moved into a house in November that just has corrugated metal sheets, and the garage is cold and damp. If a proper insulating board or felt was used in its construction I'm confident I wouldn't have these issues.
MX5 Project Thread
|
davegreen
Premium Member
Registered: 20th May 12
Location: Oxfordshire
User status: Offline
|
I did this to my shed's roof
[img]http://[/img]
but to be serious, box profile roof sheets, you can get all sorts and colours and insulated. just done mine at home, 28' x 10' and was under £400 for the metal and all screw.
http://www.cladco.co.uk/
|
AndyKent
Member
Registered: 3rd Sep 05
User status: Offline
|
quote: Originally posted by nibnob21
Make sure you use some sort of insulation. If you just stick with a single skin of corrugated metal or perspex you'll get condensation that'll drip onto whatever's below it.
I moved into a house in November that just has corrugated metal sheets, and the garage is cold and damp. If a proper insulating board or felt was used in its construction I'm confident I wouldn't have these issues.
Waste of time if you haven't got any heating. The vapour will just condensate above the insulation where you can't see it.
Either ventilation or heating needed. Insulation (depending on its type) will just trap water and rot the timbers out.
|
Ricky352
Member
Registered: 6th Apr 07
Location: Lisburn, N.I.
User status: Offline
|
Cheers for replys folks.
Mark I've already started building it, so a prefab is out of the question. Would they not be dear enough though?
Felt was a thought - that's what's on the roof of my other shed. Those box profile roof sheets look interesting too. Will price them both up, and will price the felt with shuttering board.
I'm not going to be too worried about insulation. I have another structure with corregated perspex roof and no insluation, and although a bit of condensation does form and fall, it's really not that much.
Now swaying towards felt or box profile sheets - I've a mate that should be able to wire in a light from the house, so I'll not need to worrying about utilising daylight.
Thanks for replys!
|
IvIarkgraham
Premium Member
Registered: 27th Mar 04
Location: Ellesmere Port, Cheshire
User status: Offline
|
http://www.edecks.co.uk/m/products/18743/73/256/0/Clear-Multiwall-Polycarbonate-10mm-(2000mm-x-700mm)
I built Dow the side of my mum n dads house with this.
|
IvIarkgraham
Premium Member
Registered: 27th Mar 04
Location: Ellesmere Port, Cheshire
User status: Offline
|
http://www.shedsworld.co.uk/p/Storemore_10ft_x_19ft_(3.05m_x_5.79m)_Canberra_Garage.htm?product_id=264880&utm_source=pla&gclid=Cj0KEQjwmKG5BRDv4YaE5t6oqf0BEiQAwqDNfJ4YwK7lhY_GUBJyfGZEEDLRTvJ39wOQpfB1jTUiRaAaAtHM8P8HAQ
|
Ricky352
Member
Registered: 6th Apr 07
Location: Lisburn, N.I.
User status: Offline
|
Looks good Mark, like the way it says it doesn't let too much UV through. Would cost about £300 to use those if my maths is right.
|
Ricky352
Member
Registered: 6th Apr 07
Location: Lisburn, N.I.
User status: Offline
|
quote: Originally posted by IvIarkgraham
http://www.shedsworld.co.uk/p/Storemore_10ft_x_19ft_(3.05m_x_5.79m)_Canberra_Garage.htm?product_id=264880&utm_source=pla&gclid=Cj0KEQjwmKG5BRDv4YaE5t6oqf0BEiQAwqDNfJ4YwK7lhY_GUBJyfGZEEDLRTvJ39wOQpfB1jTUiRaAaAtHM8P8HAQ
Cheaper than I thought they'd be. Would you need a concrete floor for these though. In my shed I'm planning on using flag stones, which were already in the garden.
I originally wanted to build mine for £500. It already stands me £200 and I'm nowhere near even half way. Guts of £1,000 probably. Kind of enjoying building it though.
|
IvIarkgraham
Premium Member
Registered: 27th Mar 04
Location: Ellesmere Port, Cheshire
User status: Offline
|
it ould be better on a concrete base but I doubt its needed
|
DaveyLC
Member
Registered: 8th Oct 08
Location: Berkshire
User status: Offline
|
quote: Originally posted by IvIarkgraham
http://www.shedsworld.co.uk/p/Storemore_10ft_x_19ft_(3.05m_x_5.79m)_Canberra_Garage.htm?product_id=264880&utm_source=pla&gclid=Cj0KEQjwmKG5BRDv4YaE5t6oqf0BEiQAwqDNfJ4YwK7lhY_GUBJyfGZEEDLRTvJ39wOQpfB1jTUiRaAaAtHM8P8HAQ
These are awful.. I had one at my old house, easy to assemble and you get a lot of your money BUT (and its a big but) they suffer REALLY BADLY from condensation, the roof is like a permanent rain cloud.
|
Graeme
Premium Member
Registered: 26th Jul 04
Location: Northampton
User status: Offline
|
This is mine.
Flat roof with osb board and then felted on top. The angle at the end has Perspex to let light in.
|