Pete917
Member
Registered: 12th Nov 06
User status: Offline
|
Can anyone help me find where the coil wires are for a 1994 Corsa B 1.4 GLS. I need it to identify rpm for a alarm input. Any help?
|
Vaux Lad
Member
Registered: 15th Dec 04
Location: Stoke-on-Trent
User status: Offline
|
The tacho/rev counter is wired through the ecu.
You need the green wire that goes from the ecu to the dash clocks.
|
Pete917
Member
Registered: 12th Nov 06
User status: Offline
|
Thanks Vaux.
My car doesnt have a tacho, will the green wire still be present in the loom from the ECU to the dash clocks?
Thanks
|
Hoddo
Member
Registered: 7th Nov 06
Location: Wallisdown, Bournemouth
User status: Offline
|
it wont be present, if ya take the panel off in the drivers footwell, look for a green wire that leads to a connector of about 9 leads.
|
Pete917
Member
Registered: 12th Nov 06
User status: Offline
|
thanks Hoddo
Is it easy to pick up off the connector or easier to cut into the wire
|
Hoddo
Member
Registered: 7th Nov 06
Location: Wallisdown, Bournemouth
User status: Offline
|
well it goes into a connector block, but doesnt come out the other side. basically, its there for the clock loom should there be a rev counter. I just cut it at the connector and wired it through.
|