supermike
Member
Registered: 6th Sep 05
Location: Aberdeen. Drives: 1.4 16v Corsa
User status: Offline
|
Can someone please advise me on how to do this is to do on a X14XE with an F15 box?
Pictures would be great if available.
Cheers
Mike
|
supermike
Member
Registered: 6th Sep 05
Location: Aberdeen. Drives: 1.4 16v Corsa
User status: Offline
|
Anyone?
|
supermike
Member
Registered: 6th Sep 05
Location: Aberdeen. Drives: 1.4 16v Corsa
User status: Offline
|
ttt
|
supermike
Member
Registered: 6th Sep 05
Location: Aberdeen. Drives: 1.4 16v Corsa
User status: Offline
|
Right update on this incase anyone can help. I have removed the ball joints from the plate. The plate is held in place with a pin, which shold come out once the clips are bent out to get the pin out. I have bent the clips so they are not holding anything but i cant get the pin out does anyone know if i have missed something or is the pin rusted in and requires some brute force for it to come out?
|
Olsrey
Member
Registered: 13th Jan 07
Location: Bradford Drives: LET Vectra B
User status: Offline
|
Use a drift and a big hammer. That will get it out.
|
supermike
Member
Registered: 6th Sep 05
Location: Aberdeen. Drives: 1.4 16v Corsa
User status: Offline
|
Cool cool cheers mate. Beggining to wonder why i started now lashing with rain....
|
shultsy12
Member
Registered: 27th Oct 06
Location: Hemel Hempstead, Hertfordshire
User status: Offline
|
shud just pull out if uv bent the clips iv change myn and some mates hassle they are
|
Steve X16XE
Member
Registered: 31st Dec 06
Location: Barnsley, South Yorkshire
User status: Offline
|
You should know how to set it all up again........
http://www.corsasport.co.uk/board/viewthread.php?tid=387969
|
supermike
Member
Registered: 6th Sep 05
Location: Aberdeen. Drives: 1.4 16v Corsa
User status: Offline
|
well thats me given up now, pin wont budge tried everything. Think it might be a garage job im afraid
|
Steve X16XE
Member
Registered: 31st Dec 06
Location: Barnsley, South Yorkshire
User status: Offline
|
The pin that it all pivots on? If you have bent them out, will it wiggle? I think that you may need a long flat screwdriver. Try and tap it out from under the car.
|
supermike
Member
Registered: 6th Sep 05
Location: Aberdeen. Drives: 1.4 16v Corsa
User status: Offline
|
Yea the pin mate. Its seized solid, pin wont move at all. Getting it on the ramps on friday and taking the gearbox mount off as the clamp is attached to it then chap it out hopefully, some hassle just for a short shift but im determined to fit it. Tried chaping it but cant really get to it without the mount being off
|