FruitBooTeR
Member
Registered: 18th Jan 07
Location: Wolverhampton Drives: S15
User status: Offline
|
Ok im sure theres a few people on here who have got the kit MJ sells and have got theres working fine so can you tell me what im doing wrong please or what you did differently.
So this is the kit, ive labbeld a few things..
The 'Connecter 1' is the same fitting as the back of the standard corsa headlight bulb so it has to either go on the right or left side connecter which would normaly push onto the corsa bulb..(Ive tried both sides)
The 'Unknown' connector I presumed was an earth but when i touch it to the neggative batt terminal it just makes one of the lights flash thats it...
Tried swapping things round but no joy, as far as I can see everythings fine, fuses are ok it came supplied with 15A but manual says use 20A? Tried that to but nothing...
This is what confuses me though in the manual it says when using the H4 kit which is what this one is you have to swap the diode round?
Its also funny how it says the wires are black red red when they are brown blue white
So anyone on here got a clue, hopefully someone has fitted this kit.
Cheers
|
John
Member
Registered: 30th Jun 03
User status: Offline
|
The wires only plug into one place.
Red and black thick ones to the battery, the connector that looks like a bulb plug into one of the bulb connectors then plug the rest into the only place they fit
|
ShEp
Member
Registered: 9th Aug 05
Location: Dingwall, Highland
User status: Offline
|
'Unknown' Is an earth
|
FruitBooTeR
Member
Registered: 18th Jan 07
Location: Wolverhampton Drives: S15
User status: Offline
|
Yeh ive done all of that they dont light up.....
|
Jake
Member
Registered: 24th Jan 05
User status: Offline
|
connector 1 plugs into one of the factory sockets which before the hids were fitted plugged to the back of the halogen bulb. earth cable just needs a decent earth otherwise the lights wont work.
|
John
Member
Registered: 30th Jun 03
User status: Offline
|
Give 12v direct to the ballast if you've tried everything else and see if they fire up.
|
Jake
Member
Registered: 24th Jan 05
User status: Offline
|
what colour are the wires on the factory plug aswell?
|
FruitBooTeR
Member
Registered: 18th Jan 07
Location: Wolverhampton Drives: S15
User status: Offline
|
Yellow, White, Brown
|
Jake
Member
Registered: 24th Jan 05
User status: Offline
|
get a multimeter on the factory plug and find out what pin is dipped beam and hi beam. then swap the pins around on the hid plug so they match up
|
FruitBooTeR
Member
Registered: 18th Jan 07
Location: Wolverhampton Drives: S15
User status: Offline
|
Shouldnt have to do that though if the kit is for a corsa...
Need someone who has this kit to tell me how they did it im sure theres someone.
|
Davidkent
Member
Registered: 2nd Nov 08
Location: Warminster, Wiltshire
User status: Offline
|
Unknown is an Earth, but body and not negative terminal - Earths can cause funny things... I had this problem with a set i had before..
|
FruitBooTeR
Member
Registered: 18th Jan 07
Location: Wolverhampton Drives: S15
User status: Offline
|
Ive been putting both of the earths on - terminal mabi that is the problem.
|
marklawton
Member
Registered: 24th Apr 05
Location: Pensby, Wirral Drives:Golf mk4 GTI
User status: Offline
|
yeah mayeb, put the unkown onto the one of the wing bolts
thats where mine is and mine worked first time
|
FruitBooTeR
Member
Registered: 18th Jan 07
Location: Wolverhampton Drives: S15
User status: Offline
|
Cheers Mark
You know the standard corsa connectors that the 'connector 1' has to go into, well as theres 2 (one for each headlight) does it matter which one it goes in? and then you just leave the other one doing nothing yeh?
|
marklawton
Member
Registered: 24th Apr 05
Location: Pensby, Wirral Drives:Golf mk4 GTI
User status: Offline
|
yeah, plug it into the passenger side conection, its not long enough to reach the drivers side one anyway. and yeah leave the drivers side connection unplugged
|
marklawton
Member
Registered: 24th Apr 05
Location: Pensby, Wirral Drives:Golf mk4 GTI
User status: Offline
|
have you done it yet mate?
|
dan-sport
Member
Registered: 9th Oct 07
Location: Bushbury, West Midlands
User status: Offline
|
had a go last night and still can't get it to work
|
marklawton
Member
Registered: 24th Apr 05
Location: Pensby, Wirral Drives:Golf mk4 GTI
User status: Offline
|
if i was local i would sort it out for you. nevermind. just double check the earth has got a decent conection and all the wires are plugged into the right conections
|
FruitBooTeR
Member
Registered: 18th Jan 07
Location: Wolverhampton Drives: S15
User status: Offline
|
Had to do a vid to show MJ so thought id post it in here too
Excuse the Wolverhampton accent
http://www.youtube.com/watch?v=DyrVZ3Bv73Y
|
Jake
Member
Registered: 24th Jan 05
User status: Offline
|
do you have a multimeter to check the ballasts are getting constant power feed?
|
Richardhhha
Member
Registered: 29th Sep 07
Location: Croydon, Greater London
User status: Offline
|
tbh the balist with the red tape looks like it could be goosed mate..
|
FruitBooTeR
Member
Registered: 18th Jan 07
Location: Wolverhampton Drives: S15
User status: Offline
|
Thats what im thinking but surly if one was ok still then one bulb would light up?
And no havent got a multimeter but could easily get hold of one, but dont want to cut/strip any wires as I think there getting sent back.
|
Jamie_Hastings1
Member
Registered: 14th Aug 08
Location: Sanquhar, Dumfries and Galloway
User status: Offline
|
Cant really make it out but some of my connections on my Hid could go both ways,try turning some of the connections around. On the ballast box mines could fit both ways but they were marked - & + which i didn't notice at the start.
|