RKS
Member
Registered: 2nd Mar 04
Location: Gloucestershire UK
User status: Offline
|
im thinking about getting a 1.6 16v motor and tuning it, but dont know whether to change the engine in my car or sell up and get another newer 1.6 sport (want to go down different styling route also)
so basically I need to know how much work will be involve in changing my c14se to a x16xe
getting the motor in isnt a problem, neither is sorting out the exhaust system.
what im concerned about is the wiring of the x16xe (going to be running standard (remapped) management) can I just get an x16 engine loom and plug this into the standard car loom and then connect the ecu up to standard connector for the c14se ecu?
or will I need to do extra wiring inside the car for the ecu? also what about the diagnostics port on the fuse panel?
|
Warren G
Member
Registered: 14th May 06
Location: Kent
User status: Offline
|
will need a x16xe ecu (with transponer chips), engine loom
|
RKS
Member
Registered: 2nd Mar 04
Location: Gloucestershire UK
User status: Offline
|
quote:
Originally posted by warren.g
will need a x16xe ecu (with transponer chips), engine loom
yep i guess that much  but will i need to do wiring inside the car or will the loom thats on my current ecu be ok?
|
RobHayes
Member
Registered: 6th Sep 03
Location: Lincolnshire
User status: Offline
|
you'd need to rewire the connector between engine loom and car loom. simple case of chop plug off both engine looms,and then wire pretty much color for colour, so you still keep the original 8v engine loom plug, but connected to the 16v loom (if that makes sense)
|
RKS
Member
Registered: 2nd Mar 04
Location: Gloucestershire UK
User status: Offline
|
thanks rob so the 16v ecu will fit with the 8v ecu connector?
|
RobHayes
Member
Registered: 6th Sep 03
Location: Lincolnshire
User status: Offline
|
no. the 16v engine loom incorporates the ecu connector for the 16v ecu
|
RKS
Member
Registered: 2nd Mar 04
Location: Gloucestershire UK
User status: Offline
|
i see so the engine looms comes through the bulkhead and into the car behind the fusebox and then down to the ecu does it incorporate the fusebox or is this part of the interior loom?
|
