ainsley_brader
Member
Registered: 24th Mar 02
Location: Tattershall, Lincolnshire
User status: Offline
|
http://www.corsasport.co.uk/board/viewthread.php?tid=397706&page=1
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=150190393431&ssPageName=STRK:MESE:IT&ih=005
:O how much
|
dean101287
Member
Registered: 22nd Jul 07
Location: Cardiff
User status: Offline
|
my... you would make a good detective.
and yea the belt would have to be on for my method to work, and the engine would need to be in the car so all in all - MY BAD!
|
ryan_fowler1985
Member
Registered: 27th Jul 05
Location: Trevethin, Torfaen
User status: Offline
|
how did you get the belt off without taking the bottom cover off the engine?
|
ainsley_brader
Member
Registered: 24th Mar 02
Location: Tattershall, Lincolnshire
User status: Offline
|
he didnt he just took drop it off the cambelt pulleys!
In fact its possible the cams are out in which case it wont have done it any damage
|
csweatherston
Member
Registered: 16th Jan 06
Location: Devon
User status: Offline
|
should imagine if he's putting the belt back on that the cams are also back in.
|
Vaux Lad
Member
Registered: 15th Dec 04
Location: Stoke-on-Trent
User status: Offline
|
You cant lock the gearbox with the engine out the car, as the diff will just turn.
Remove the gearbox and lock the fly. Tho you'll need a big tyre lever or something to do it.
I bent 2 large screwdrivers when undoing mine... A 3ft tyre lever did the trick.
Tho if you've took the belt off the cam sprockets without the crank pully off, i wouldn't risk turning it over/starting it, as the belt may have jumped a tooth on the crank sprocket, which you cant see with the cover on!
|
eastend
Member
Registered: 13th Mar 07
Location: Taunton, Somerset
User status: Offline
|
the engine is in top condition. There has been no damage caused to it. And even If there was any bent valves like you have suggested then i would of course offer the buyer a full refund. He has my contact number and address and knows to get hold of me.
|
ainsley_brader
Member
Registered: 24th Mar 02
Location: Tattershall, Lincolnshire
User status: Offline
|
So have you been turning the engine over with the cams in but withouth the cambelt on?
|