Rick Draper
Member
Registered: 10th Feb 01
Location: Cheshire
User status: Offline
|
I have just got my pulse 450 plenum back from been powder coated and have been looking into fitting it. The first problem i can see is there are no nipples to connect the small vacume pipes to (FPR and fuel breather thing). How do people get around this problem? There is only the threaded take off for the brake servo. I was going to try and fit it tomorrow but it looks like i will put this off for a few days.
I will get some pic's up later on.
|
fragpot
Member
Registered: 29th Feb 04
Location: Linlithgow, West Lothian
User status: Offline
|
no idea tried running it all from the one take off with a couple of T piece vaccum connectors?
|
myke
Member
Registered: 7th Feb 01
Location: High Wycombe, Buckinghamshire
User status: Offline
|
you don't need the fuel vent canister iirc, and you should be able to t off from rthe servo pipe.
|
Rick Draper
Member
Registered: 10th Feb 01
Location: Cheshire
User status: Offline
|
There is what i have at the moment. Also will my C20XE TB work with the velo's setup?
|
myke
Member
Registered: 7th Feb 01
Location: High Wycombe, Buckinghamshire
User status: Offline
|
looks like a square plate to me, so i'd asume not as the xe tb is oblong/trapezoid 
ith the extra tab on the tb plate of your inlet i'd say it was designed for a 16xe tb, but couldn't be certain untill i'd seen a face on pic of the mounting plate.
25xe tb's are square, so that might be an option, but my money is on small block tb.
what's the random pipe exiting between 2 & 3 ? water jacket?
|
James R
Member
Registered: 4th Feb 03
Location: 205GTi16/306GTi16
User status: Offline
|
You can get the none return valve with a nipple off ti to run the vac stuff you want to, had one on my nova which hooked up to the carbon casnister system, coulf see if Vx will supply one?
|
Dave A
USER UNDER INVESTIGATION - DO NOT TRADE
Registered: 10th Dec 03
Location: County Durham
User status: Offline
|
tats what I was going to say. get a 1 way valve with the vaccum take off. or just tap a thread into the end of the main body of the inlet and use a tapered vaccum fitting (like you see on mantzel boxes)
|
